AGILE - Smart sensorless drive
Innovative, eco-friendly, user-friendly
Agile series provide in a sensorless vector inverter innovations able to boost plant efficiency through open loop vector control of brushless motors, MMC memory cards and web control.
Agile inverters are easy to install, program and quick to start-up without the needs of specialized resources.
Agile inverters are easy to install, program and quick to start-up without the needs of specialized resources.
Type
|
kW
|
|---|---|
AGL402 - 02
|
0.25
|
AGL402 - 03
|
0.37
|
AGL402 - 05
|
0.55
|
AGL402 - 07
|
0.75
|
AGL402 - 09
|
1.10
|
AGL402 - 11
|
1.50
|
AGL402 - 13
|
2.20
|
AGL402 - 15
|
3.00
|
AGL402 - 18
|
4.00
|
AGL402 - 19
|
5.50
|
AGL402 - 21
|
7.50
|
AGL402 - 22
|
9.20
|
AGL402 - 23
|
11.00
|
Technical data
Power Range
0.25 kW - 11 kW / three-phase 320 V ... 530 V / 45 Hz... 69 Hz
Motor compatibility
Two types of motor:
Asynchronous AC motors
Permanent magnet synchronous (brushless) motors
Type of Control
Selectable control function:
V/f control for asynchronous motors
Sensor-less vector control for asynchronous motors
Sensor-less vector control for brushless motors
Degree of protection
IP20 (EN 60529)
Main hardware features
Power supply from common DC bus
Integrated braking module
Short circuit / ground fault protection
Integrated Safe Torque Off safety system
Plug-in and programmable control terminals
6 digital inputs, 2 multifunctional A/D inputs
1 multifunctional I/O, 1 digital output
1 multifunctional A/D/pulse output, 1 relay output (alarm)
available power outputs: +24 V DC, +10 V DC
optional separate 24 V DC electronic power supply
standard serial interfaces: RS-232, RS485, Systembus
Integrated Modbus
Optional expansion modules
Resource Pack memory card
Optional communication modules
Profibus-DP, CANopen
PC software
VPlus suite
Main software features
Permanent motor tuning
Safe-Torque-Off function
Energy saving function
Ready to use application masks
Integrated maintenance wizard
Alarm history
Motor and inverter state memory
Autodiagnostics
Integrated PLC function with graphic development environment
Integrated oscilloscope function
Customisable units of measurement
0.25 kW - 11 kW / three-phase 320 V ... 530 V / 45 Hz... 69 Hz
Motor compatibility
Two types of motor:
Asynchronous AC motors
Permanent magnet synchronous (brushless) motors
Type of Control
Selectable control function:
V/f control for asynchronous motors
Sensor-less vector control for asynchronous motors
Sensor-less vector control for brushless motors
Degree of protection
IP20 (EN 60529)
Main hardware features
Power supply from common DC bus
Integrated braking module
Short circuit / ground fault protection
Integrated Safe Torque Off safety system
Plug-in and programmable control terminals
6 digital inputs, 2 multifunctional A/D inputs
1 multifunctional I/O, 1 digital output
1 multifunctional A/D/pulse output, 1 relay output (alarm)
available power outputs: +24 V DC, +10 V DC
optional separate 24 V DC electronic power supply
standard serial interfaces: RS-232, RS485, Systembus
Integrated Modbus
Optional expansion modules
Resource Pack memory card
Optional communication modules
Profibus-DP, CANopen
PC software
VPlus suite
Main software features
Permanent motor tuning
Safe-Torque-Off function
Energy saving function
Ready to use application masks
Integrated maintenance wizard
Alarm history
Motor and inverter state memory
Autodiagnostics
Integrated PLC function with graphic development environment
Integrated oscilloscope function
Customisable units of measurement
SYNTHESIS - Sensorless drive
Install and go
The simple use, wide range of controls, integrated EMC filter, IP65 protection level and the limited size make the SYN10 a sound response to the broadest needs for electronic speed variation, where basic performance and contained costs are matched with robust construction and great reliability.
Type
|
Power kW
|
|---|---|
SYN10 S -001
|
0.2
|
SYN10 S -003
|
0.4
|
SYN10 S -005
|
0.75
|
SYN10 S -007
|
1.5
|
SYN10 S -009
|
2.2
|
Type
|
Power kW
|
|---|---|
SYN10 T -007
|
1.5
|
SYN10 T -005
|
0.75
|
SYN10 T -009
|
2.2
|
Technical data
Power Range (SYN10 S 220)
0.2 - 0.75kW 1-Phase 200 - 240V / 50 - 60Hz (+10,-15%)
1.5 - 2.2kW 1 and 3-Phase 200 - 240V / 50 - 60Hz (+10,-15%)
Power Range (SYN10 T 400)
0.75 - 2.2kW 3-Phase 380 - 460V / 50 - 60Hz (+10,-15%)
Type of Control
V/f control with Torque Gain and Selectable Patterns
Overload Capacity
150% for 60s
Switching Frequency
4-16 kHz
Enclosure
IP20, IP65
EMC Filter
Standard Integrated A Class (EN 61800-3)
Main Standard Hardware features
Integrated braking module (SYN10 S 220/07/09 - SYN10 T 400)
DC link connection (SYN10 S 220/07/09 - SYN10 T 400)
Inverter temperature monitoring
1 Analog Input (V or I selectable)
4 Digital Input (programmable multifunction)
1 Analog Output (voltage linear)
1 Relay output (programmable multifunction)
Keypad
Integrated standard
Main Functions
I2t Motor temperature monitoring
DC braking injection
Selectable Volt on Hz characteristic
JOG frequency
Selectable Auto-restart
Selectable stop method
Automatic alarm reset
Alarm history
Momentary power loss prevention
Stall prevention
Output Short-Circuit protection
Grounding fault protection
Heat sink overheat protection
Current limit
0.2 - 0.75kW 1-Phase 200 - 240V / 50 - 60Hz (+10,-15%)
1.5 - 2.2kW 1 and 3-Phase 200 - 240V / 50 - 60Hz (+10,-15%)
Power Range (SYN10 T 400)
0.75 - 2.2kW 3-Phase 380 - 460V / 50 - 60Hz (+10,-15%)
Type of Control
V/f control with Torque Gain and Selectable Patterns
Overload Capacity
150% for 60s
Switching Frequency
4-16 kHz
Enclosure
IP20, IP65
EMC Filter
Standard Integrated A Class (EN 61800-3)
Main Standard Hardware features
Integrated braking module (SYN10 S 220/07/09 - SYN10 T 400)
DC link connection (SYN10 S 220/07/09 - SYN10 T 400)
Inverter temperature monitoring
1 Analog Input (V or I selectable)
4 Digital Input (programmable multifunction)
1 Analog Output (voltage linear)
1 Relay output (programmable multifunction)
Keypad
Integrated standard
Main Functions
I2t Motor temperature monitoring
DC braking injection
Selectable Volt on Hz characteristic
JOG frequency
Selectable Auto-restart
Selectable stop method
Automatic alarm reset
Alarm history
Momentary power loss prevention
Stall prevention
Output Short-Circuit protection
Grounding fault protection
Heat sink overheat protection
Current limit
ACTIVE - Solution drive
Versatility, rating, performances
A full series of flexible solution drives that are versatile and extremely easy to use, featuring control for high performance and unbeatable advantages in their scalability and compact size.
Type
|
Power kW*
|
|---|---|
ACT201 - 05
|
0.55
|
ACT201 - 07
|
0.75
|
ACT201 - 09
|
1.10
|
ACT201 - 11
|
1.50
|
ACT201 - 13
|
2.20
|
ACT201 - 15
|
3.00
|
ACT201 - 18
|
4.00
|
ACT201 - 19
|
5.50
|
ACT201 - 21
|
7.50
|
ACT201 - 22
|
9.20
|
ACT401 - 05
|
0.55
|
ACT401 - 07
|
0.75
|
ACT401 - 09
|
1.10
|
ACT401 - 11
|
1.50
|
ACT401 - 12
|
1.85
|
ACT401 - 13
|
2.20
|
ACT401 - 15
|
3.00
|
ACT401 - 18
|
4.00
|
ACT401 - 19
|
5.50
|
ACT401 - 21
|
7.50
|
ACT401 - 22
|
9.20
|
ACT401 - 23
|
11.00
|
ACT401 - 25
|
15.00
|
ACT401 - 27
|
18.50
|
ACT401 - 29
|
22.00
|
ACT401 - 31
|
30.00
|
ACT401 - 33
|
37.00
|
ACT401 - 35
|
45.00
|
ACT401 - 37
|
55.00
|
ACT401 - 39
|
65.00
|
ACT401 - 43
|
75.00
|
ACT401 - 45
|
90.00
|
ACT401 - 47
|
110.00
|
ACT401 - 49
|
132.00
|
Technical data
Power Range (ACT401)
0.55 - 132 kW / three-phase 360 - 480V / 50 - 60 Hz (± 10%)
Power Range (ACT201)
0.55 - 9.2 kW / single or three-phase 200 - 240V / 50 - 60 Hz (± 10%)
Type of Control
Selectable Vector control function:
sensor-less control, sensor-less field oriented control,
field oriented control with encoder
Overload Capacity
150% for 60s / 200% for 1s
Switching Frequency
2, 4, 8, 12, 16 kHz
Enclosure
IP20 (EN 60529)
EMC Filter
Integrated up to 9.2 kW (EN 61800-3)
Main Standard Hardware features
Integrated dynamic braking module
DC link connection
Standard encoder interface
Motor temperature monitoring
Plug-in power terminals (up to 3kW)
Plug-in and programmable control terminals
6 digital input, 1 multifunction input
1 digital Output, 1 multifunction Output
1 relay output (changeover contact)
Optional Expansion Modules
Expansion of analog, digital inputs and outputs, additional encoder or resolver input, repetition frequency output, System bus (canopen)
Optional Communication Modules
RS232, RS485, Profibus-DP, CANopen
Optional Keypad
Removable keypad KP500 with copy function
Cabinet mounting kit and handheld for keypad
Optional PC Software
VPlus for Windows operating system with set-up, terminal monitor, actual value window, scope function and teleservice
Main Software Features
Programmable reference value channel, Programmable start and stop characteristics, Motor potentiometer, Programmable S curve , 4 data sets, Auto strat-up and commissioning, Auto reset after failure, Auto start after power failure, PL controller, Programmable logic and timer functions, volume floow control, Bump-Less torque/speed changeover, Master / Slave function with electronic gear, Enhanced positioning function, Mechanical brake control free off friction, Index and stability control intelligent current limits, Power failure regulation, Comprehensive monitoring and protection capabilities, High speed control, Function for lift, crane and winch applications, 3 different brake Management Functions.
0.55 - 132 kW / three-phase 360 - 480V / 50 - 60 Hz (± 10%)
Power Range (ACT201)
0.55 - 9.2 kW / single or three-phase 200 - 240V / 50 - 60 Hz (± 10%)
Type of Control
Selectable Vector control function:
sensor-less control, sensor-less field oriented control,
field oriented control with encoder
Overload Capacity
150% for 60s / 200% for 1s
Switching Frequency
2, 4, 8, 12, 16 kHz
Enclosure
IP20 (EN 60529)
EMC Filter
Integrated up to 9.2 kW (EN 61800-3)
Main Standard Hardware features
Integrated dynamic braking module
DC link connection
Standard encoder interface
Motor temperature monitoring
Plug-in power terminals (up to 3kW)
Plug-in and programmable control terminals
6 digital input, 1 multifunction input
1 digital Output, 1 multifunction Output
1 relay output (changeover contact)
Optional Expansion Modules
Expansion of analog, digital inputs and outputs, additional encoder or resolver input, repetition frequency output, System bus (canopen)
Optional Communication Modules
RS232, RS485, Profibus-DP, CANopen
Optional Keypad
Removable keypad KP500 with copy function
Cabinet mounting kit and handheld for keypad
Optional PC Software
VPlus for Windows operating system with set-up, terminal monitor, actual value window, scope function and teleservice
Main Software Features
Programmable reference value channel, Programmable start and stop characteristics, Motor potentiometer, Programmable S curve , 4 data sets, Auto strat-up and commissioning, Auto reset after failure, Auto start after power failure, PL controller, Programmable logic and timer functions, volume floow control, Bump-Less torque/speed changeover, Master / Slave function with electronic gear, Enhanced positioning function, Mechanical brake control free off friction, Index and stability control intelligent current limits, Power failure regulation, Comprehensive monitoring and protection capabilities, High speed control, Function for lift, crane and winch applications, 3 different brake Management Functions.
没有评论:
发表评论