VLT® AutomationDrive FC 300
The VLT® AutomationDrive is a single drive concept that covers the entire range of application, which is a major benefit in commissioning, operating and maintaining the equipment.
The VLT...
The VLT...
Features and benefits
Range
0.25 - 37 kW (200 - 240 V)
0.37 - 800 kW (380 - 500 V)
0.75 - 75 KW (525 - 600V)
1.1 kW – 1.4 MW (525 - 690V)
Enclosures The drive meets requirements for enclosure class IP 20/Chassis. Optional IP21/NEMA 1, IP55/NEMA 12, IP 54/NEMA12 or IP66 NEMA 4X.
Smart logic controllerThe VLT® AutomationDrive features logic control functions and a sequence control based on events and actions.
Safety The drive is delivered as standard with the Safe Torque Off (Safe Stop) function in compliance with EN ISO 13849-1 Category 3 PL d and SIL 2 according to IEC 61508 low demand and high demand mode. The safety functions can be extended to include SS1, SLS, SMS, SSM, safe jog mode etc. with the VLT Safe Option MCB140 Series and VLT Safe Option MCB150 Series.
Hot pluggable LCP The Local Control Panel (LCP) can be plugged in or out during operation. Settings are easily transferred via the control panel from one drive to another or from a PC with set-up software.
0.25 - 37 kW (200 - 240 V)
0.37 - 800 kW (380 - 500 V)
0.75 - 75 KW (525 - 600V)
1.1 kW – 1.4 MW (525 - 690V)
Enclosures The drive meets requirements for enclosure class IP 20/Chassis. Optional IP21/NEMA 1, IP55/NEMA 12, IP 54/NEMA12 or IP66 NEMA 4X.
Smart logic controllerThe VLT® AutomationDrive features logic control functions and a sequence control based on events and actions.
Safety The drive is delivered as standard with the Safe Torque Off (Safe Stop) function in compliance with EN ISO 13849-1 Category 3 PL d and SIL 2 according to IEC 61508 low demand and high demand mode. The safety functions can be extended to include SS1, SLS, SMS, SSM, safe jog mode etc. with the VLT Safe Option MCB140 Series and VLT Safe Option MCB150 Series.
Hot pluggable LCP The Local Control Panel (LCP) can be plugged in or out during operation. Settings are easily transferred via the control panel from one drive to another or from a PC with set-up software.
Features and benefits
Cooling can take place in two ways to offer different sets of benefits. Forced convection cooling: A fan blows cold air through the cooling ribs of the aluminium base to remove heat. The channel is easily cleaned without touching electronics. Cold plate cooling: External cooling is possible through the back side of the aluminium base. Panel through mounting: Electronics inside cabinet - power heat sink outside cabinet. Duct cooling: Air from the control room – or from outside – cools the heat sink without contact to the electronics.
Accessories For the VLT® AutomationDrive FC 302 a wide selection of accessories is available to suit your needs. For further details see Operation Instruction.
OptionsOptions for bus communication, synchronisation, user programs, etc., are delivered ready to plug-and-play.
Display optionsGraphical Local Control Panel(LCP 102)
Numerical Local Control Panel (LCP 101)
LCP Panel Mounting Kit
Blind Cover
Application option24V input option for control voltage.
Fieldbus options PROFIBUS DP V1 (MCA 101)
DeviceNet (MCA 104)
CAN Open (MCA 105)
PROFINET (MCA 120)
EtherNet IP (MCA 121)
Modbus TCP (MCA 122)
POWERLINK (MCA 123)
EtherCAT (MCA 124)
Features and benefits
Encoder Input (MCB 102)
Resolver Input (MCB 103)
Relay Option (MCB 105)
Safe PLC I/O (MCB 108)
PTC Thermistor Card (MCB 112)
Ext. Relay Card (MCB 113)
VLT Sensor Input (MCB 114)
Motion control options
Motion Control (MCO 305)
Synchronizing Control (MCO 350)
Positioning Control (MCO 351)
Center Winder (MCO 352)
Brake ResistorsBrake resistors
Fittings and frames for mounting more resistors together
Power Options
Advanced Harmonic Filter (AHF 005/010 MCE)
Sine-Wave Filters (MCC 101)
dU/dt filter (MCC 102)
Other accessories
IP21/NEMA 1 Kit
Profibus Adaptor
Sub-D9 Connector
Decoupling Plate for Fieldbus Cables USB Connection cable to PC
没有评论:
发表评论