VACON 10
VACON 10 – As easy as possible
VACON 10 is a compact drive designed for applications where simplicity and efficiency are key requirements. All the functionality is built into a single unit, with the option of DIN-rail mounting available to enable quick and easy installation and handling time. A forced cooled heat sink is a key feature in facilitating its compact size.
Features
-
Easy-to-use push button interface
-
Wide standard I/O
-
Temperature controlled cooling fan
-
Side-by-side mounting
-
Built-in EMC filter
-
Built-in PI controller DIN-rail mounting available
Benefits
-
Short installation time
-
Fast commissioning
-
Space-saving design
-
Parameter copying without main power
VACON 20 Cold Plate
VACON 20 Cold Plate – Flexibility in Cooling
The VACON 20 Cold Plate has all the same functionality as the VACON 20, including built-in PLC functionality according to IEC61131-3 and a similar power range. What sets it apart is a unique passive cooling solution that allows the drive to work under the most demanding circumstances. Heat loss in AC drives can often affect surrounding machinery, particularly in compact drives that are mounted in a tight space without sufficient airflow. VACON 20 Cold Plate’s special cooling solution sidesteps this issue. Heat loss from the drive can be reduced in two ways: by being attached to a heat sink with large cooling ribs, or alternatively, by utilizing a liquid-cooled solution. You can choose the best solution depending on the situation. Easy and quick installation make it a great OEM drive, as does the slender, economical design which allows it to fit into the tightest of spaces.
Features
-
Power range up to 7.5 kW
-
Available in voltages 380-480V
-
Cold plate cooling
-
Unique low depth design
-
Safe Torque Off (STO) mode in accordance with SIL2
-
Ambient temperature rating up to 70°C
-
Induction and permanent magnet (PM) motor control
-
Integrated brake resistor
-
Status LEDs on drive
-
Expansion slot for I/0 or fieldbus
-
Handheld text keypad with copy function
-
Single plug I/0 connector for OEMs
Benefits
-
Highest cooling flexibility and performance available
-
Fast plugging of I/0 wiring
-
Custom-made software possible
-
Optimum solution with customized application software
-
Fast installation and setup
VACON 100 FLOW
VACON 100 FLOW – Intelligent Process Control
VACON 100 FLOW is an AC drive dedicated to improving flow control in Building Automation and Water & Wastewater applications. It combines core functionality of VACON 100 with features that are specifically designed for flow control applications, such as Multipump solutions and application selection menus.
Features
- Power range of 0.55 kW/0.75 HP to 160 kW/250 HP
- Available in two voltage versions 208 - 240 V and 380 - 500 V
- IP21/UL Type 1 or IP54/UL Type 12 certified enclosures
- Dedicated flow control functionality
- Multipump single drive, Multimaster and Multifollower pump control solutions as standard
- Graphical keypad with wizards and application menus
- Electrolytic-free DC link capacitors for long lifetime and high reliability
- Integrated Safe torque off (STO) option, Safe Stop and ATEX thermistor protection
- BACnet IP, Modbus TCP, Profinet IO (optional) and Ethernet IP (optional) via on-board Ethernet
- Modbus RTU, Metasys N2 and BACnet MSTP via RS485 available as standard
Benefits
- Dedicated functionality for pump, fan and compressor applications makes system integration easy and efficient
- Electrolytic-free DC link capacitors for long lifetime and minimized lifecycle cost
- Graphical keypad with wizard guides the user through commissioning and drive startup
- Built-in Ethernet and RS485 communication as standard offers efficient integration into automation systems
VACON 20 X
VACON 20 X – Performance under pressure
VACON 20 X sees Vacon utilizing its experience in producing high-class enclosed drives to offer a decentralized drive solution with countless possibilities.
An IP66/Type 4X enclosure offers the best possible protection from harsh conditions and a Gore seal allows the drive to breathe while preventing the rubber sealing from being worn down. Other great features such as large cooling ribs and an integrated main switch make VACON 20 X the right choice when your drive needs to be installed right in the field. VACON 20 X comes in the power range 0.75 kW to 7.5 kW - for motor mountable solutions providing power up to 30 kW, see VACON 100 X decentralized AC drive.
Features
-
IP66/Type 4X enclosure
-
Large cooling ribs
-
2g resistance to vibrations (according to 3M6/IEC 60068-2)
-
Option of integrated main switch
-
Safe Torque Off (STO) according to SIL3
-
Runs induction and permanent magnet motors
-
Integrated PID controller
-
Wide amount of fieldbus connections
-
Built-in EMC filter for category level C2.
-
Brake chopper integrated
Benefits
-
Cost savings from decentralized concept
-
Can be used in almost any indoor environment
-
Can be cleaned with pressurized water
-
Custom-made software solutions with built-in PLC functionality for OEMs
-
Mountable in any position; fits into any available space
VACON NXL
VACON NXL – The easy and impressive AC drive
The Vacon NXL is a powerful standard AC drive for industrial and residential purposes in the power range from 0.75 to 30 kW.
It comes with space-saving bookshelf design, high protection classes, versatile control and programming capabilities which offer an optimal solution for all operating environments. Installation, connection and commissioning procedures are extremely quick and convenient with instructions attached to the unit.
Features
-
Trouble-free choice for all open loop applications
-
Standard unit fulfills EMC requirements for industrial, public and residential environments
-
IP21/Type 1 and IP54/Type 12 protection classes
-
Installation instructions integrated into each unit
-
High starting torque and dynamics due to open-loop vector control
-
High switching frequency (up to 16 kHz, 6 kHz standard)
-
Standard control I/O with option to be extended. RS485 integrated as standard
Benefits
-
No additional cabinets required
-
Everything integrated as standard (dust/water protection, RFI filter, AC choke, brake chopper)
-
Easy to install, easy to use
-
Large amount of control possibilities (via I/Os, field buses or display panel)
-
Large amount of features (e.g. fully programmable I/O, auto-identification, PID controller, flying start)
-
High performance
Now what you're after? View all AC drives.
VACON NXS
VACON NXS – Robust drive for heavy use
The Vacon NXS is a neatly-proportioned standard AC drive in the power range of 0.75 - 560 kW and supply voltages of 208-690 V for heavy use in machines, buildings and all branches of industry.
The robust design incorporates effective protection against supply network disturbances. Reliable operation is ensured thanks to sophisticated motor control principles, motor/drive protection features, component selection and effective cooling.
Features
-
IP21/Type 1 & IP54/Type 12 enclosures
-
Easy to use display panel
-
Interactive programming with Start-Up Wizard
-
Versatile All-in-One Package
-
PID controller and PFC for 1-5 pumps
-
Special applications available
-
Five slots for control boards (2 basic boards and 3 option boards)
-
High switching frequency, low noise
-
Steady state speed error < 1%
-
Low torque ripple
-
Starting torque > 200%, depending on AC drive sizing
-
Suitable for multi-motor applications
Benefits
-
Integrated high-level EMC filters make the Vacon NXS suitable for all environments.
-
Start-Up Wizard and All-In-One Application Package for easy parameter setting
-
Multi-monitoring system enables simultaneous monitoring of up to 3 values
-
Standard I/O and option for five I/O boards provide versatile controllability.
-
Most common fieldbus options available
VACON 20
VACON 20 – Possibilities and performance
VACON 20 has a performance level far beyond what you’d expect in a compact AC drive. A wide power range of up to 18.5 kW and built-in PLC functionality make it highly adaptable and its quick and easy installation process mean it is perfect for efficient volume manufacturing applications such as packaging and processing.
Features
-
Wide power range up to 18.5 kW/25 HP
-
Available in voltages 110-600V
-
Built-in RS-485 interface for fieldbus control
-
Full I/O + optional board support
-
Built-in choke as option in ≥16A types
-
Pulse train input
-
Easy user interface
-
Built-in PLC functionality based on IEC61131-3
-
Built-in EMC filter
-
DIN-rail mounting available
Benefits
-
High functionality and performance
-
Fieldbus support for many systems, including CANOpen, DeviceNet & Profibus
-
Parameter copying without main power
-
Custom-made software available
-
Fast and easy installation and setup
Not what you're after? View all AC drives.
References
New AC drive portfolio for OEMs
VACON 10, VACON 20 and VACON 20 Cold Plate are optimized for the needs of original equipment manufacturers (OEM). The new product range further strengthens Vacon's foothold in this high-volume AC drive market.
READ MORE >
VACON 100
VACON 100 – 100 reasons to choose from
VACON 100 is a multipurpose drive that can be used in hundreds of different applications. Its versatility is what sets it apart from competitors, and the features it contains are designed to make it easy to run and maintain. Built-in Ethernet allows for easy integration to plant automation and VACON Live means the user can commission, maintain and monitor performance remotely. The drive can be customized for all kinds of purposes to ensure you get the most out of it, whatever the environment you need it for.
Features
-
Built-in Modbus TCP and Modbus RTU. Profinet I/O or Ethernet/IP as software option
-
Integrated Safe torque off (STO) option, Safe Stop and ATEX thermistor protection
-
EMC compliance with integrated RFI filter.
-
Integrated DC chokes
-
Conformal coating
-
Compact IP54/UL Type 12 with same footprint as IP21/UL Type 1
-
Flange mounting
-
Side by side mounting for IP54/UL Type 12
-
Standard I/O + 3 free slots
-
Fieldbus options, integrated PLC capability
-
High efficiency >97% + energy optimization
-
Energy counter
-
Real time clock with calendar based functions
-
Optimized control of cooling fan
-
Drive Optimizer for adapting functionality
Benefits
-
Compliance with global standards and approvals
-
Easy integration into plant automation
-
All-in-one package – no additional accessories required
-
Easy and cost effective commissioning, installation and monitoring
-
Suitable for wide installation needs
-
Wide power range 0.55 kW to 160 kW
Now what you're after? View all AC drives.
VACON 100 HVAC
VACON 100 HVAC - Premium AC drive for indoor climate control
The VACON 100 HVAC is an AC drive with a power range of 0.55-160 kW, and for supply voltages of 230 V, 400 V or 480 V, that is dedicated to heating, ventilation and air conditioning. The VACON 100 HVAC is designed specifically for the building automation industry, and can enhance pump, fan and compressor applications.
Easy installation and efficient, trouble-free operation mean that just about anyone can commission the VACON 100 HVAC with a speedy return on investment guaranteed.
Features
-
Enclosure classes IP21/Type 1 and IP54/Type 12
-
BMS controller with industrial ethernet and RS485 protocols
-
BACnet IP and Modbus TCP via Ethernet and Modbus RTU, Metasys N2 and BACnet MSTP via RS485 available as standard
-
EMC harmonics: EN 61000-3-12 compliant
-
IEC61800-5-1 (2007), UL 508 C safety approval
-
CE, UL, cUL approvals
-
Graphical HMI keypad
-
Built-in PID controller
-
Standard I/O and optional expansion cards
-
Real Time Clock with battery backup
-
No charge time during storage time
-
RoHS compliant, no electrolytic capacitors, no lead in the circuit boards
Benefits
-
Dedicated drive for HVAC applications:
-
Pumps
-
Fans
-
Compressors (chillers)
-
Built-in communication saves on investment costs
-
No need for additional harmonics filter
-
All circuits are designed with IEC 60721-3-3 for high immunity in demanding environments
-
IP54/Type 12 units save space and costs
-
Plenum-mountable to save on costs and easily integrated
VACON 100 X
VACON 100 X – A decentralized drive like no other
The VACON 100 X sets a new benchmark for decentralized drive solutions. It has a power range up to 30 kW – unmatched by competitors – and has highly advanced control capability which guarantees processes run exactly how you want them to.
A die-cast metal enclosure provides the best protection available, a breathable Gore vent protects the sealings and a heatsink cooling system which isn’t dependent on motor airflow. On top of all this, it has built-in harmonic filtering chokes, making it easy to see why this is is the ideal motor mountable solution for all sorts of applications. For a more compact solution which also provides IP66/Type 4X protection, see VACON 20 X decentralized AC drive.
Features
-
IP66/Type 4X enclosure
-
3g resistance to vibrations (according to 3M7/IEC 60068-2)
-
Supports both induction and permanent magnet motors
-
Option of ability to operate in temperatures ranging from -40°C to 60°C
-
Integrated with RS485 Modbus and Industrial Ethernet communication
-
Integrated Safe Torque Off (STO) mode according to SIL3
-
Built-in EMC filter for EN61800-3 category C2 (C1 as option)
-
DC choke and film capacitor meets EN61000-3-12 requirements
-
Integrated brake chopper
-
PTC input as standard
Benefits
-
Able to withstand rough conditions such as heat, dirt and vibrations
-
Easy to keep clean
-
Approval for public networks makes it flexible for installation
-
Vacon Programming enables top class integration for countless OEM applications
-
High efficiency and simulated air flow ensure long lifetime
-
Motor/machine Mountable in any position; fits into any available space
Not what you're after? View all AC drives.
References
VACON® 100 X & VACON® 20 X – Decentralized drives with unmatched protection
During the second week of June, Vacon’s customers and friends, flocked to Vaasa on the west coast of Finland for the Vacon Drives Conference 2012. One of the most exciting aspects of the week’s festivities was the launch of two new decentralized products: VACON 100 X & VACON 20 X.
READ MORE >
Stick your drive where it belongs!
The right place to mount an ac drive in many applications is on the motor it is controlling. Read more on the benefits of motor-mounted drives and Vacon´s offering in the field.
READ MORE >
VACON 10
VACON 10 – As easy as possible
VACON 10 is a compact drive designed for applications where simplicity and efficiency are key requirements. All the functionality is built into a single unit, with the option of DIN-rail mounting available to enable quick and easy installation and handling time. A forced cooled heat sink is a key feature in facilitating its compact size.
Features
-
Easy-to-use push button interface
-
Wide standard I/O
-
Temperature controlled cooling fan
-
Side-by-side mounting
-
Built-in EMC filter
-
Built-in PI controller DIN-rail mounting available
Benefits
-
Short installation time
-
Fast commissioning
-
Space-saving design
-
Parameter copying without main power
VACON 20 Cold Plate
VACON 20 Cold Plate – Flexibility in Cooling
The VACON 20 Cold Plate has all the same functionality as the VACON 20, including built-in PLC functionality according to IEC61131-3 and a similar power range. What sets it apart is a unique passive cooling solution that allows the drive to work under the most demanding circumstances. Heat loss in AC drives can often affect surrounding machinery, particularly in compact drives that are mounted in a tight space without sufficient airflow. VACON 20 Cold Plate’s special cooling solution sidesteps this issue. Heat loss from the drive can be reduced in two ways: by being attached to a heat sink with large cooling ribs, or alternatively, by utilizing a liquid-cooled solution. You can choose the best solution depending on the situation. Easy and quick installation make it a great OEM drive, as does the slender, economical design which allows it to fit into the tightest of spaces.
Features
-
Power range up to 7.5 kW
-
Available in voltages 380-480V
-
Cold plate cooling
-
Unique low depth design
-
Safe Torque Off (STO) mode in accordance with SIL2
-
Ambient temperature rating up to 70°C
-
Induction and permanent magnet (PM) motor control
-
Integrated brake resistor
-
Status LEDs on drive
-
Expansion slot for I/0 or fieldbus
-
Handheld text keypad with copy function
-
Single plug I/0 connector for OEMs
Benefits
-
Highest cooling flexibility and performance available
-
Fast plugging of I/0 wiring
-
Custom-made software possible
-
Optimum solution with customized application software
-
Fast installation and setup
VACON 100 FLOW
VACON 100 FLOW – Intelligent Process Control
VACON 100 FLOW is an AC drive dedicated to improving flow control in Building Automation and Water & Wastewater applications. It combines core functionality of VACON 100 with features that are specifically designed for flow control applications, such as Multipump solutions and application selection menus.
Features
- Power range of 0.55 kW/0.75 HP to 160 kW/250 HP
- Available in two voltage versions 208 - 240 V and 380 - 500 V
- IP21/UL Type 1 or IP54/UL Type 12 certified enclosures
- Dedicated flow control functionality
- Multipump single drive, Multimaster and Multifollower pump control solutions as standard
- Graphical keypad with wizards and application menus
- Electrolytic-free DC link capacitors for long lifetime and high reliability
- Integrated Safe torque off (STO) option, Safe Stop and ATEX thermistor protection
- BACnet IP, Modbus TCP, Profinet IO (optional) and Ethernet IP (optional) via on-board Ethernet
- Modbus RTU, Metasys N2 and BACnet MSTP via RS485 available as standard
Benefits
- Dedicated functionality for pump, fan and compressor applications makes system integration easy and efficient
- Electrolytic-free DC link capacitors for long lifetime and minimized lifecycle cost
- Graphical keypad with wizard guides the user through commissioning and drive startup
- Built-in Ethernet and RS485 communication as standard offers efficient integration into automation systems
VACON 20 X
VACON 20 X – Performance under pressure
VACON 20 X sees Vacon utilizing its experience in producing high-class enclosed drives to offer a decentralized drive solution with countless possibilities.
An IP66/Type 4X enclosure offers the best possible protection from harsh conditions and a Gore seal allows the drive to breathe while preventing the rubber sealing from being worn down. Other great features such as large cooling ribs and an integrated main switch make VACON 20 X the right choice when your drive needs to be installed right in the field. VACON 20 X comes in the power range 0.75 kW to 7.5 kW - for motor mountable solutions providing power up to 30 kW, see VACON 100 X decentralized AC drive.
Features
-
IP66/Type 4X enclosure
-
Large cooling ribs
-
2g resistance to vibrations (according to 3M6/IEC 60068-2)
-
Option of integrated main switch
-
Safe Torque Off (STO) according to SIL3
-
Runs induction and permanent magnet motors
-
Integrated PID controller
-
Wide amount of fieldbus connections
-
Built-in EMC filter for category level C2.
-
Brake chopper integrated
Benefits
-
Cost savings from decentralized concept
-
Can be used in almost any indoor environment
-
Can be cleaned with pressurized water
-
Custom-made software solutions with built-in PLC functionality for OEMs
-
Mountable in any position; fits into any available space
VACON NXL
VACON NXL – The easy and impressive AC drive
The Vacon NXL is a powerful standard AC drive for industrial and residential purposes in the power range from 0.75 to 30 kW.
It comes with space-saving bookshelf design, high protection classes, versatile control and programming capabilities which offer an optimal solution for all operating environments. Installation, connection and commissioning procedures are extremely quick and convenient with instructions attached to the unit.
Features
-
Trouble-free choice for all open loop applications
-
Standard unit fulfills EMC requirements for industrial, public and residential environments
-
IP21/Type 1 and IP54/Type 12 protection classes
-
Installation instructions integrated into each unit
-
High starting torque and dynamics due to open-loop vector control
-
High switching frequency (up to 16 kHz, 6 kHz standard)
-
Standard control I/O with option to be extended. RS485 integrated as standard
Benefits
-
No additional cabinets required
-
Everything integrated as standard (dust/water protection, RFI filter, AC choke, brake chopper)
-
Easy to install, easy to use
-
Large amount of control possibilities (via I/Os, field buses or display panel)
-
Large amount of features (e.g. fully programmable I/O, auto-identification, PID controller, flying start)
-
High performance
Now what you're after? View all AC drives.
VACON NXS
VACON NXS – Robust drive for heavy use
The Vacon NXS is a neatly-proportioned standard AC drive in the power range of 0.75 - 560 kW and supply voltages of 208-690 V for heavy use in machines, buildings and all branches of industry.
The robust design incorporates effective protection against supply network disturbances. Reliable operation is ensured thanks to sophisticated motor control principles, motor/drive protection features, component selection and effective cooling.
Features
-
IP21/Type 1 & IP54/Type 12 enclosures
-
Easy to use display panel
-
Interactive programming with Start-Up Wizard
-
Versatile All-in-One Package
-
PID controller and PFC for 1-5 pumps
-
Special applications available
-
Five slots for control boards (2 basic boards and 3 option boards)
-
High switching frequency, low noise
-
Steady state speed error < 1%
-
Low torque ripple
-
Starting torque > 200%, depending on AC drive sizing
-
Suitable for multi-motor applications
Benefits
-
Integrated high-level EMC filters make the Vacon NXS suitable for all environments.
-
Start-Up Wizard and All-In-One Application Package for easy parameter setting
-
Multi-monitoring system enables simultaneous monitoring of up to 3 values
-
Standard I/O and option for five I/O boards provide versatile controllability.
-
Most common fieldbus options available
VACON 20
VACON 20 – Possibilities and performance
VACON 20 has a performance level far beyond what you’d expect in a compact AC drive. A wide power range of up to 18.5 kW and built-in PLC functionality make it highly adaptable and its quick and easy installation process mean it is perfect for efficient volume manufacturing applications such as packaging and processing.
Features
-
Wide power range up to 18.5 kW/25 HP
-
Available in voltages 110-600V
-
Built-in RS-485 interface for fieldbus control
-
Full I/O + optional board support
-
Built-in choke as option in ≥16A types
-
Pulse train input
-
Easy user interface
-
Built-in PLC functionality based on IEC61131-3
-
Built-in EMC filter
-
DIN-rail mounting available
Benefits
-
High functionality and performance
-
Fieldbus support for many systems, including CANOpen, DeviceNet & Profibus
-
Parameter copying without main power
-
Custom-made software available
-
Fast and easy installation and setup
Not what you're after? View all AC drives.
References
New AC drive portfolio for OEMs
VACON 10, VACON 20 and VACON 20 Cold Plate are optimized for the needs of original equipment manufacturers (OEM). The new product range further strengthens Vacon's foothold in this high-volume AC drive market.
READ MORE >
VACON 100
VACON 100 – 100 reasons to choose from
VACON 100 is a multipurpose drive that can be used in hundreds of different applications. Its versatility is what sets it apart from competitors, and the features it contains are designed to make it easy to run and maintain. Built-in Ethernet allows for easy integration to plant automation and VACON Live means the user can commission, maintain and monitor performance remotely. The drive can be customized for all kinds of purposes to ensure you get the most out of it, whatever the environment you need it for.
Features
-
Built-in Modbus TCP and Modbus RTU. Profinet I/O or Ethernet/IP as software option
-
Integrated Safe torque off (STO) option, Safe Stop and ATEX thermistor protection
-
EMC compliance with integrated RFI filter.
-
Integrated DC chokes
-
Conformal coating
-
Compact IP54/UL Type 12 with same footprint as IP21/UL Type 1
-
Flange mounting
-
Side by side mounting for IP54/UL Type 12
-
Standard I/O + 3 free slots
-
Fieldbus options, integrated PLC capability
-
High efficiency >97% + energy optimization
-
Energy counter
-
Real time clock with calendar based functions
-
Optimized control of cooling fan
-
Drive Optimizer for adapting functionality
Benefits
-
Compliance with global standards and approvals
-
Easy integration into plant automation
-
All-in-one package – no additional accessories required
-
Easy and cost effective commissioning, installation and monitoring
-
Suitable for wide installation needs
-
Wide power range 0.55 kW to 160 kW
Now what you're after? View all AC drives.
VACON 100 HVAC
VACON 100 HVAC - Premium AC drive for indoor climate control
The VACON 100 HVAC is an AC drive with a power range of 0.55-160 kW, and for supply voltages of 230 V, 400 V or 480 V, that is dedicated to heating, ventilation and air conditioning. The VACON 100 HVAC is designed specifically for the building automation industry, and can enhance pump, fan and compressor applications.
Easy installation and efficient, trouble-free operation mean that just about anyone can commission the VACON 100 HVAC with a speedy return on investment guaranteed.
Features
-
Enclosure classes IP21/Type 1 and IP54/Type 12
-
BMS controller with industrial ethernet and RS485 protocols
-
BACnet IP and Modbus TCP via Ethernet and Modbus RTU, Metasys N2 and BACnet MSTP via RS485 available as standard
-
EMC harmonics: EN 61000-3-12 compliant
-
IEC61800-5-1 (2007), UL 508 C safety approval
-
CE, UL, cUL approvals
-
Graphical HMI keypad
-
Built-in PID controller
-
Standard I/O and optional expansion cards
-
Real Time Clock with battery backup
-
No charge time during storage time
-
RoHS compliant, no electrolytic capacitors, no lead in the circuit boards
Benefits
-
Dedicated drive for HVAC applications:
-
Pumps
-
Fans
-
Compressors (chillers)
-
Built-in communication saves on investment costs
-
No need for additional harmonics filter
-
All circuits are designed with IEC 60721-3-3 for high immunity in demanding environments
-
IP54/Type 12 units save space and costs
-
Plenum-mountable to save on costs and easily integrated
VACON 10
VACON 10 – As easy as possible
VACON 10 is a compact drive designed for applications where simplicity and efficiency are key requirements. All the functionality is built into a single unit, with the option of DIN-rail mounting available to enable quick and easy installation and handling time. A forced cooled heat sink is a key feature in facilitating its compact size.
Features
-
Easy-to-use push button interface
-
Wide standard I/O
-
Temperature controlled cooling fan
-
Side-by-side mounting
-
Built-in EMC filter
-
Built-in PI controller DIN-rail mounting available
Benefits
-
Short installation time
-
Fast commissioning
-
Space-saving design
-
Parameter copying without main power
VACON 20 Cold Plate
VACON 20 Cold Plate – Flexibility in Cooling
The VACON 20 Cold Plate has all the same functionality as the VACON 20, including built-in PLC functionality according to IEC61131-3 and a similar power range. What sets it apart is a unique passive cooling solution that allows the drive to work under the most demanding circumstances. Heat loss in AC drives can often affect surrounding machinery, particularly in compact drives that are mounted in a tight space without sufficient airflow. VACON 20 Cold Plate’s special cooling solution sidesteps this issue. Heat loss from the drive can be reduced in two ways: by being attached to a heat sink with large cooling ribs, or alternatively, by utilizing a liquid-cooled solution. You can choose the best solution depending on the situation. Easy and quick installation make it a great OEM drive, as does the slender, economical design which allows it to fit into the tightest of spaces.
Features
-
Power range up to 7.5 kW
-
Available in voltages 380-480V
-
Cold plate cooling
-
Unique low depth design
-
Safe Torque Off (STO) mode in accordance with SIL2
-
Ambient temperature rating up to 70°C
-
Induction and permanent magnet (PM) motor control
-
Integrated brake resistor
-
Status LEDs on drive
-
Expansion slot for I/0 or fieldbus
-
Handheld text keypad with copy function
-
Single plug I/0 connector for OEMs
Benefits
-
Highest cooling flexibility and performance available
-
Fast plugging of I/0 wiring
-
Custom-made software possible
-
Optimum solution with customized application software
-
Fast installation and setup
VACON 100 FLOW
VACON 100 FLOW – Intelligent Process Control
VACON 100 FLOW is an AC drive dedicated to improving flow control in Building Automation and Water & Wastewater applications. It combines core functionality of VACON 100 with features that are specifically designed for flow control applications, such as Multipump solutions and application selection menus.
Features
- Power range of 0.55 kW/0.75 HP to 160 kW/250 HP
- Available in two voltage versions 208 - 240 V and 380 - 500 V
- IP21/UL Type 1 or IP54/UL Type 12 certified enclosures
- Dedicated flow control functionality
- Multipump single drive, Multimaster and Multifollower pump control solutions as standard
- Graphical keypad with wizards and application menus
- Electrolytic-free DC link capacitors for long lifetime and high reliability
- Integrated Safe torque off (STO) option, Safe Stop and ATEX thermistor protection
- BACnet IP, Modbus TCP, Profinet IO (optional) and Ethernet IP (optional) via on-board Ethernet
- Modbus RTU, Metasys N2 and BACnet MSTP via RS485 available as standard
Benefits
- Dedicated functionality for pump, fan and compressor applications makes system integration easy and efficient
- Electrolytic-free DC link capacitors for long lifetime and minimized lifecycle cost
- Graphical keypad with wizard guides the user through commissioning and drive startup
- Built-in Ethernet and RS485 communication as standard offers efficient integration into automation systems
VACON 20 X
VACON 20 X – Performance under pressure
VACON 20 X sees Vacon utilizing its experience in producing high-class enclosed drives to offer a decentralized drive solution with countless possibilities.
An IP66/Type 4X enclosure offers the best possible protection from harsh conditions and a Gore seal allows the drive to breathe while preventing the rubber sealing from being worn down. Other great features such as large cooling ribs and an integrated main switch make VACON 20 X the right choice when your drive needs to be installed right in the field. VACON 20 X comes in the power range 0.75 kW to 7.5 kW - for motor mountable solutions providing power up to 30 kW, see VACON 100 X decentralized AC drive.
Features
-
IP66/Type 4X enclosure
-
Large cooling ribs
-
2g resistance to vibrations (according to 3M6/IEC 60068-2)
-
Option of integrated main switch
-
Safe Torque Off (STO) according to SIL3
-
Runs induction and permanent magnet motors
-
Integrated PID controller
-
Wide amount of fieldbus connections
-
Built-in EMC filter for category level C2.
-
Brake chopper integrated
Benefits
-
Cost savings from decentralized concept
-
Can be used in almost any indoor environment
-
Can be cleaned with pressurized water
-
Custom-made software solutions with built-in PLC functionality for OEMs
-
Mountable in any position; fits into any available space
VACON NXL
VACON NXL – The easy and impressive AC drive
The Vacon NXL is a powerful standard AC drive for industrial and residential purposes in the power range from 0.75 to 30 kW.
It comes with space-saving bookshelf design, high protection classes, versatile control and programming capabilities which offer an optimal solution for all operating environments. Installation, connection and commissioning procedures are extremely quick and convenient with instructions attached to the unit.
Features
-
Trouble-free choice for all open loop applications
-
Standard unit fulfills EMC requirements for industrial, public and residential environments
-
IP21/Type 1 and IP54/Type 12 protection classes
-
Installation instructions integrated into each unit
-
High starting torque and dynamics due to open-loop vector control
-
High switching frequency (up to 16 kHz, 6 kHz standard)
-
Standard control I/O with option to be extended. RS485 integrated as standard
Benefits
-
No additional cabinets required
-
Everything integrated as standard (dust/water protection, RFI filter, AC choke, brake chopper)
-
Easy to install, easy to use
-
Large amount of control possibilities (via I/Os, field buses or display panel)
-
Large amount of features (e.g. fully programmable I/O, auto-identification, PID controller, flying start)
-
High performance
Now what you're after? View all AC drives.
VACON NXS
VACON NXS – Robust drive for heavy use
The Vacon NXS is a neatly-proportioned standard AC drive in the power range of 0.75 - 560 kW and supply voltages of 208-690 V for heavy use in machines, buildings and all branches of industry.
The robust design incorporates effective protection against supply network disturbances. Reliable operation is ensured thanks to sophisticated motor control principles, motor/drive protection features, component selection and effective cooling.
Features
-
IP21/Type 1 & IP54/Type 12 enclosures
-
Easy to use display panel
-
Interactive programming with Start-Up Wizard
-
Versatile All-in-One Package
-
PID controller and PFC for 1-5 pumps
-
Special applications available
-
Five slots for control boards (2 basic boards and 3 option boards)
-
High switching frequency, low noise
-
Steady state speed error < 1%
-
Low torque ripple
-
Starting torque > 200%, depending on AC drive sizing
-
Suitable for multi-motor applications
Benefits
-
Integrated high-level EMC filters make the Vacon NXS suitable for all environments.
-
Start-Up Wizard and All-In-One Application Package for easy parameter setting
-
Multi-monitoring system enables simultaneous monitoring of up to 3 values
-
Standard I/O and option for five I/O boards provide versatile controllability.
-
Most common fieldbus options available
VACON 20
VACON 20 – Possibilities and performance
VACON 20 has a performance level far beyond what you’d expect in a compact AC drive. A wide power range of up to 18.5 kW and built-in PLC functionality make it highly adaptable and its quick and easy installation process mean it is perfect for efficient volume manufacturing applications such as packaging and processing.
Features
-
Wide power range up to 18.5 kW/25 HP
-
Available in voltages 110-600V
-
Built-in RS-485 interface for fieldbus control
-
Full I/O + optional board support
-
Built-in choke as option in ≥16A types
-
Pulse train input
-
Easy user interface
-
Built-in PLC functionality based on IEC61131-3
-
Built-in EMC filter
-
DIN-rail mounting available
Benefits
-
High functionality and performance
-
Fieldbus support for many systems, including CANOpen, DeviceNet & Profibus
-
Parameter copying without main power
-
Custom-made software available
-
Fast and easy installation and setup
Not what you're after? View all AC drives.
References
New AC drive portfolio for OEMs
VACON 10, VACON 20 and VACON 20 Cold Plate are optimized for the needs of original equipment manufacturers (OEM). The new product range further strengthens Vacon's foothold in this high-volume AC drive market.
READ MORE >
VACON 100
VACON 100 – 100 reasons to choose from
VACON 100 is a multipurpose drive that can be used in hundreds of different applications. Its versatility is what sets it apart from competitors, and the features it contains are designed to make it easy to run and maintain. Built-in Ethernet allows for easy integration to plant automation and VACON Live means the user can commission, maintain and monitor performance remotely. The drive can be customized for all kinds of purposes to ensure you get the most out of it, whatever the environment you need it for.
Features
-
Built-in Modbus TCP and Modbus RTU. Profinet I/O or Ethernet/IP as software option
-
Integrated Safe torque off (STO) option, Safe Stop and ATEX thermistor protection
-
EMC compliance with integrated RFI filter.
-
Integrated DC chokes
-
Conformal coating
-
Compact IP54/UL Type 12 with same footprint as IP21/UL Type 1
-
Flange mounting
-
Side by side mounting for IP54/UL Type 12
-
Standard I/O + 3 free slots
-
Fieldbus options, integrated PLC capability
-
High efficiency >97% + energy optimization
-
Energy counter
-
Real time clock with calendar based functions
-
Optimized control of cooling fan
-
Drive Optimizer for adapting functionality
Benefits
-
Compliance with global standards and approvals
-
Easy integration into plant automation
-
All-in-one package – no additional accessories required
-
Easy and cost effective commissioning, installation and monitoring
-
Suitable for wide installation needs
-
Wide power range 0.55 kW to 160 kW
Now what you're after? View all AC drives.
VACON 10
VACON 10 – As easy as possible
VACON 10 is a compact drive designed for applications where simplicity and efficiency are key requirements. All the functionality is built into a single unit, with the option of DIN-rail mounting available to enable quick and easy installation and handling time. A forced cooled heat sink is a key feature in facilitating its compact size.
Features
-
Easy-to-use push button interface
-
Wide standard I/O
-
Temperature controlled cooling fan
-
Side-by-side mounting
-
Built-in EMC filter
-
Built-in PI controller DIN-rail mounting available
Benefits
-
Short installation time
-
Fast commissioning
-
Space-saving design
-
Parameter copying without main power
VACON 20 Cold Plate
VACON 20 Cold Plate – Flexibility in Cooling
The VACON 20 Cold Plate has all the same functionality as the VACON 20, including built-in PLC functionality according to IEC61131-3 and a similar power range. What sets it apart is a unique passive cooling solution that allows the drive to work under the most demanding circumstances. Heat loss in AC drives can often affect surrounding machinery, particularly in compact drives that are mounted in a tight space without sufficient airflow. VACON 20 Cold Plate’s special cooling solution sidesteps this issue. Heat loss from the drive can be reduced in two ways: by being attached to a heat sink with large cooling ribs, or alternatively, by utilizing a liquid-cooled solution. You can choose the best solution depending on the situation. Easy and quick installation make it a great OEM drive, as does the slender, economical design which allows it to fit into the tightest of spaces.
Features
-
Power range up to 7.5 kW
-
Available in voltages 380-480V
-
Cold plate cooling
-
Unique low depth design
-
Safe Torque Off (STO) mode in accordance with SIL2
-
Ambient temperature rating up to 70°C
-
Induction and permanent magnet (PM) motor control
-
Integrated brake resistor
-
Status LEDs on drive
-
Expansion slot for I/0 or fieldbus
-
Handheld text keypad with copy function
-
Single plug I/0 connector for OEMs
Benefits
-
Highest cooling flexibility and performance available
-
Fast plugging of I/0 wiring
-
Custom-made software possible
-
Optimum solution with customized application software
-
Fast installation and setup
VACON 100 FLOW
VACON 100 FLOW – Intelligent Process Control
VACON 100 FLOW is an AC drive dedicated to improving flow control in Building Automation and Water & Wastewater applications. It combines core functionality of VACON 100 with features that are specifically designed for flow control applications, such as Multipump solutions and application selection menus.
Features
- Power range of 0.55 kW/0.75 HP to 160 kW/250 HP
- Available in two voltage versions 208 - 240 V and 380 - 500 V
- IP21/UL Type 1 or IP54/UL Type 12 certified enclosures
- Dedicated flow control functionality
- Multipump single drive, Multimaster and Multifollower pump control solutions as standard
- Graphical keypad with wizards and application menus
- Electrolytic-free DC link capacitors for long lifetime and high reliability
- Integrated Safe torque off (STO) option, Safe Stop and ATEX thermistor protection
- BACnet IP, Modbus TCP, Profinet IO (optional) and Ethernet IP (optional) via on-board Ethernet
- Modbus RTU, Metasys N2 and BACnet MSTP via RS485 available as standard
Benefits
- Dedicated functionality for pump, fan and compressor applications makes system integration easy and efficient
- Electrolytic-free DC link capacitors for long lifetime and minimized lifecycle cost
- Graphical keypad with wizard guides the user through commissioning and drive startup
- Built-in Ethernet and RS485 communication as standard offers efficient integration into automation systems
VACON 20 X
VACON 20 X – Performance under pressure
VACON 20 X sees Vacon utilizing its experience in producing high-class enclosed drives to offer a decentralized drive solution with countless possibilities.
An IP66/Type 4X enclosure offers the best possible protection from harsh conditions and a Gore seal allows the drive to breathe while preventing the rubber sealing from being worn down. Other great features such as large cooling ribs and an integrated main switch make VACON 20 X the right choice when your drive needs to be installed right in the field. VACON 20 X comes in the power range 0.75 kW to 7.5 kW - for motor mountable solutions providing power up to 30 kW, see VACON 100 X decentralized AC drive.
Features
-
IP66/Type 4X enclosure
-
Large cooling ribs
-
2g resistance to vibrations (according to 3M6/IEC 60068-2)
-
Option of integrated main switch
-
Safe Torque Off (STO) according to SIL3
-
Runs induction and permanent magnet motors
-
Integrated PID controller
-
Wide amount of fieldbus connections
-
Built-in EMC filter for category level C2.
-
Brake chopper integrated
Benefits
-
Cost savings from decentralized concept
-
Can be used in almost any indoor environment
-
Can be cleaned with pressurized water
-
Custom-made software solutions with built-in PLC functionality for OEMs
-
Mountable in any position; fits into any available space
VACON NXL
VACON NXL – The easy and impressive AC drive
The Vacon NXL is a powerful standard AC drive for industrial and residential purposes in the power range from 0.75 to 30 kW.
It comes with space-saving bookshelf design, high protection classes, versatile control and programming capabilities which offer an optimal solution for all operating environments. Installation, connection and commissioning procedures are extremely quick and convenient with instructions attached to the unit.
Features
-
Trouble-free choice for all open loop applications
-
Standard unit fulfills EMC requirements for industrial, public and residential environments
-
IP21/Type 1 and IP54/Type 12 protection classes
-
Installation instructions integrated into each unit
-
High starting torque and dynamics due to open-loop vector control
-
High switching frequency (up to 16 kHz, 6 kHz standard)
-
Standard control I/O with option to be extended. RS485 integrated as standard
Benefits
-
No additional cabinets required
-
Everything integrated as standard (dust/water protection, RFI filter, AC choke, brake chopper)
-
Easy to install, easy to use
-
Large amount of control possibilities (via I/Os, field buses or display panel)
-
Large amount of features (e.g. fully programmable I/O, auto-identification, PID controller, flying start)
-
High performance
Now what you're after? View all AC drives.
VACON NXS
VACON NXS – Robust drive for heavy use
The Vacon NXS is a neatly-proportioned standard AC drive in the power range of 0.75 - 560 kW and supply voltages of 208-690 V for heavy use in machines, buildings and all branches of industry.
The robust design incorporates effective protection against supply network disturbances. Reliable operation is ensured thanks to sophisticated motor control principles, motor/drive protection features, component selection and effective cooling.
Features
-
IP21/Type 1 & IP54/Type 12 enclosures
-
Easy to use display panel
-
Interactive programming with Start-Up Wizard
-
Versatile All-in-One Package
-
PID controller and PFC for 1-5 pumps
-
Special applications available
-
Five slots for control boards (2 basic boards and 3 option boards)
-
High switching frequency, low noise
-
Steady state speed error < 1%
-
Low torque ripple
-
Starting torque > 200%, depending on AC drive sizing
-
Suitable for multi-motor applications
Benefits
-
Integrated high-level EMC filters make the Vacon NXS suitable for all environments.
-
Start-Up Wizard and All-In-One Application Package for easy parameter setting
-
Multi-monitoring system enables simultaneous monitoring of up to 3 values
-
Standard I/O and option for five I/O boards provide versatile controllability.
-
Most common fieldbus options available
VACON 20
VACON 20 – Possibilities and performance
VACON 20 has a performance level far beyond what you’d expect in a compact AC drive. A wide power range of up to 18.5 kW and built-in PLC functionality make it highly adaptable and its quick and easy installation process mean it is perfect for efficient volume manufacturing applications such as packaging and processing.
Features
-
Wide power range up to 18.5 kW/25 HP
-
Available in voltages 110-600V
-
Built-in RS-485 interface for fieldbus control
-
Full I/O + optional board support
-
Built-in choke as option in ≥16A types
-
Pulse train input
-
Easy user interface
-
Built-in PLC functionality based on IEC61131-3
-
Built-in EMC filter
-
DIN-rail mounting available
Benefits
-
High functionality and performance
-
Fieldbus support for many systems, including CANOpen, DeviceNet & Profibus
-
Parameter copying without main power
-
Custom-made software available
-
Fast and easy installation and setup
Not what you're after? View all AC drives.
References
New AC drive portfolio for OEMs
VACON 10, VACON 20 and VACON 20 Cold Plate are optimized for the needs of original equipment manufacturers (OEM). The new product range further strengthens Vacon's foothold in this high-volume AC drive market.
READ MORE >
VACON 10
VACON 10 – As easy as possible
VACON 10 is a compact drive designed for applications where simplicity and efficiency are key requirements. All the functionality is built into a single unit, with the option of DIN-rail mounting available to enable quick and easy installation and handling time. A forced cooled heat sink is a key feature in facilitating its compact size.
Features
-
Easy-to-use push button interface
-
Wide standard I/O
-
Temperature controlled cooling fan
-
Side-by-side mounting
-
Built-in EMC filter
-
Built-in PI controller DIN-rail mounting available
Benefits
-
Short installation time
-
Fast commissioning
-
Space-saving design
-
Parameter copying without main power
VACON 20 Cold Plate
VACON 20 Cold Plate – Flexibility in Cooling
The VACON 20 Cold Plate has all the same functionality as the VACON 20, including built-in PLC functionality according to IEC61131-3 and a similar power range. What sets it apart is a unique passive cooling solution that allows the drive to work under the most demanding circumstances. Heat loss in AC drives can often affect surrounding machinery, particularly in compact drives that are mounted in a tight space without sufficient airflow. VACON 20 Cold Plate’s special cooling solution sidesteps this issue. Heat loss from the drive can be reduced in two ways: by being attached to a heat sink with large cooling ribs, or alternatively, by utilizing a liquid-cooled solution. You can choose the best solution depending on the situation. Easy and quick installation make it a great OEM drive, as does the slender, economical design which allows it to fit into the tightest of spaces.
Features
-
Power range up to 7.5 kW
-
Available in voltages 380-480V
-
Cold plate cooling
-
Unique low depth design
-
Safe Torque Off (STO) mode in accordance with SIL2
-
Ambient temperature rating up to 70°C
-
Induction and permanent magnet (PM) motor control
-
Integrated brake resistor
-
Status LEDs on drive
-
Expansion slot for I/0 or fieldbus
-
Handheld text keypad with copy function
-
Single plug I/0 connector for OEMs
Benefits
-
Highest cooling flexibility and performance available
-
Fast plugging of I/0 wiring
-
Custom-made software possible
-
Optimum solution with customized application software
-
Fast installation and setup
VACON 100 FLOW
VACON 100 FLOW – Intelligent Process Control
VACON 100 FLOW is an AC drive dedicated to improving flow control in Building Automation and Water & Wastewater applications. It combines core functionality of VACON 100 with features that are specifically designed for flow control applications, such as Multipump solutions and application selection menus.
Features
- Power range of 0.55 kW/0.75 HP to 160 kW/250 HP
- Available in two voltage versions 208 - 240 V and 380 - 500 V
- IP21/UL Type 1 or IP54/UL Type 12 certified enclosures
- Dedicated flow control functionality
- Multipump single drive, Multimaster and Multifollower pump control solutions as standard
- Graphical keypad with wizards and application menus
- Electrolytic-free DC link capacitors for long lifetime and high reliability
- Integrated Safe torque off (STO) option, Safe Stop and ATEX thermistor protection
- BACnet IP, Modbus TCP, Profinet IO (optional) and Ethernet IP (optional) via on-board Ethernet
- Modbus RTU, Metasys N2 and BACnet MSTP via RS485 available as standard
Benefits
- Dedicated functionality for pump, fan and compressor applications makes system integration easy and efficient
- Electrolytic-free DC link capacitors for long lifetime and minimized lifecycle cost
- Graphical keypad with wizard guides the user through commissioning and drive startup
- Built-in Ethernet and RS485 communication as standard offers efficient integration into automation systems
VACON 20 X
VACON 20 X – Performance under pressure
VACON 20 X sees Vacon utilizing its experience in producing high-class enclosed drives to offer a decentralized drive solution with countless possibilities.
An IP66/Type 4X enclosure offers the best possible protection from harsh conditions and a Gore seal allows the drive to breathe while preventing the rubber sealing from being worn down. Other great features such as large cooling ribs and an integrated main switch make VACON 20 X the right choice when your drive needs to be installed right in the field. VACON 20 X comes in the power range 0.75 kW to 7.5 kW - for motor mountable solutions providing power up to 30 kW, see VACON 100 X decentralized AC drive.
Features
-
IP66/Type 4X enclosure
-
Large cooling ribs
-
2g resistance to vibrations (according to 3M6/IEC 60068-2)
-
Option of integrated main switch
-
Safe Torque Off (STO) according to SIL3
-
Runs induction and permanent magnet motors
-
Integrated PID controller
-
Wide amount of fieldbus connections
-
Built-in EMC filter for category level C2.
-
Brake chopper integrated
Benefits
-
Cost savings from decentralized concept
-
Can be used in almost any indoor environment
-
Can be cleaned with pressurized water
-
Custom-made software solutions with built-in PLC functionality for OEMs
-
Mountable in any position; fits into any available space
VACON NXL
VACON NXL – The easy and impressive AC drive
The Vacon NXL is a powerful standard AC drive for industrial and residential purposes in the power range from 0.75 to 30 kW.
It comes with space-saving bookshelf design, high protection classes, versatile control and programming capabilities which offer an optimal solution for all operating environments. Installation, connection and commissioning procedures are extremely quick and convenient with instructions attached to the unit.
Features
-
Trouble-free choice for all open loop applications
-
Standard unit fulfills EMC requirements for industrial, public and residential environments
-
IP21/Type 1 and IP54/Type 12 protection classes
-
Installation instructions integrated into each unit
-
High starting torque and dynamics due to open-loop vector control
-
High switching frequency (up to 16 kHz, 6 kHz standard)
-
Standard control I/O with option to be extended. RS485 integrated as standard
Benefits
-
No additional cabinets required
-
Everything integrated as standard (dust/water protection, RFI filter, AC choke, brake chopper)
-
Easy to install, easy to use
-
Large amount of control possibilities (via I/Os, field buses or display panel)
-
Large amount of features (e.g. fully programmable I/O, auto-identification, PID controller, flying start)
-
High performance
Now what you're after? View all AC drives.
VACON NXS
VACON NXS – Robust drive for heavy use
The Vacon NXS is a neatly-proportioned standard AC drive in the power range of 0.75 - 560 kW and supply voltages of 208-690 V for heavy use in machines, buildings and all branches of industry.
The robust design incorporates effective protection against supply network disturbances. Reliable operation is ensured thanks to sophisticated motor control principles, motor/drive protection features, component selection and effective cooling.
Features
-
IP21/Type 1 & IP54/Type 12 enclosures
-
Easy to use display panel
-
Interactive programming with Start-Up Wizard
-
Versatile All-in-One Package
-
PID controller and PFC for 1-5 pumps
-
Special applications available
-
Five slots for control boards (2 basic boards and 3 option boards)
-
High switching frequency, low noise
-
Steady state speed error < 1%
-
Low torque ripple
-
Starting torque > 200%, depending on AC drive sizing
-
Suitable for multi-motor applications
Benefits
-
Integrated high-level EMC filters make the Vacon NXS suitable for all environments.
-
Start-Up Wizard and All-In-One Application Package for easy parameter setting
-
Multi-monitoring system enables simultaneous monitoring of up to 3 values
-
Standard I/O and option for five I/O boards provide versatile controllability.
-
Most common fieldbus options available
VACON 10
VACON 10 – As easy as possible
VACON 10 is a compact drive designed for applications where simplicity and efficiency are key requirements. All the functionality is built into a single unit, with the option of DIN-rail mounting available to enable quick and easy installation and handling time. A forced cooled heat sink is a key feature in facilitating its compact size.
Features
-
Easy-to-use push button interface
-
Wide standard I/O
-
Temperature controlled cooling fan
-
Side-by-side mounting
-
Built-in EMC filter
-
Built-in PI controller DIN-rail mounting available
Benefits
-
Short installation time
-
Fast commissioning
-
Space-saving design
-
Parameter copying without main power
VACON 20 Cold Plate
VACON 20 Cold Plate – Flexibility in Cooling
The VACON 20 Cold Plate has all the same functionality as the VACON 20, including built-in PLC functionality according to IEC61131-3 and a similar power range. What sets it apart is a unique passive cooling solution that allows the drive to work under the most demanding circumstances. Heat loss in AC drives can often affect surrounding machinery, particularly in compact drives that are mounted in a tight space without sufficient airflow. VACON 20 Cold Plate’s special cooling solution sidesteps this issue. Heat loss from the drive can be reduced in two ways: by being attached to a heat sink with large cooling ribs, or alternatively, by utilizing a liquid-cooled solution. You can choose the best solution depending on the situation. Easy and quick installation make it a great OEM drive, as does the slender, economical design which allows it to fit into the tightest of spaces.
Features
-
Power range up to 7.5 kW
-
Available in voltages 380-480V
-
Cold plate cooling
-
Unique low depth design
-
Safe Torque Off (STO) mode in accordance with SIL2
-
Ambient temperature rating up to 70°C
-
Induction and permanent magnet (PM) motor control
-
Integrated brake resistor
-
Status LEDs on drive
-
Expansion slot for I/0 or fieldbus
-
Handheld text keypad with copy function
-
Single plug I/0 connector for OEMs
Benefits
-
Highest cooling flexibility and performance available
-
Fast plugging of I/0 wiring
-
Custom-made software possible
-
Optimum solution with customized application software
-
Fast installation and setup
VACON 100 FLOW
VACON 100 FLOW – Intelligent Process Control
VACON 100 FLOW is an AC drive dedicated to improving flow control in Building Automation and Water & Wastewater applications. It combines core functionality of VACON 100 with features that are specifically designed for flow control applications, such as Multipump solutions and application selection menus.
Features
- Power range of 0.55 kW/0.75 HP to 160 kW/250 HP
- Available in two voltage versions 208 - 240 V and 380 - 500 V
- IP21/UL Type 1 or IP54/UL Type 12 certified enclosures
- Dedicated flow control functionality
- Multipump single drive, Multimaster and Multifollower pump control solutions as standard
- Graphical keypad with wizards and application menus
- Electrolytic-free DC link capacitors for long lifetime and high reliability
- Integrated Safe torque off (STO) option, Safe Stop and ATEX thermistor protection
- BACnet IP, Modbus TCP, Profinet IO (optional) and Ethernet IP (optional) via on-board Ethernet
- Modbus RTU, Metasys N2 and BACnet MSTP via RS485 available as standard
Benefits
- Dedicated functionality for pump, fan and compressor applications makes system integration easy and efficient
- Electrolytic-free DC link capacitors for long lifetime and minimized lifecycle cost
- Graphical keypad with wizard guides the user through commissioning and drive startup
- Built-in Ethernet and RS485 communication as standard offers efficient integration into automation systems
VACON 20 X
VACON 20 X – Performance under pressure
VACON 20 X sees Vacon utilizing its experience in producing high-class enclosed drives to offer a decentralized drive solution with countless possibilities.
An IP66/Type 4X enclosure offers the best possible protection from harsh conditions and a Gore seal allows the drive to breathe while preventing the rubber sealing from being worn down. Other great features such as large cooling ribs and an integrated main switch make VACON 20 X the right choice when your drive needs to be installed right in the field. VACON 20 X comes in the power range 0.75 kW to 7.5 kW - for motor mountable solutions providing power up to 30 kW, see VACON 100 X decentralized AC drive.
Features
-
IP66/Type 4X enclosure
-
Large cooling ribs
-
2g resistance to vibrations (according to 3M6/IEC 60068-2)
-
Option of integrated main switch
-
Safe Torque Off (STO) according to SIL3
-
Runs induction and permanent magnet motors
-
Integrated PID controller
-
Wide amount of fieldbus connections
-
Built-in EMC filter for category level C2.
-
Brake chopper integrated
Benefits
-
Cost savings from decentralized concept
-
Can be used in almost any indoor environment
-
Can be cleaned with pressurized water
-
Custom-made software solutions with built-in PLC functionality for OEMs
-
Mountable in any position; fits into any available space
VACON NXL
VACON NXL – The easy and impressive AC drive
The Vacon NXL is a powerful standard AC drive for industrial and residential purposes in the power range from 0.75 to 30 kW.
It comes with space-saving bookshelf design, high protection classes, versatile control and programming capabilities which offer an optimal solution for all operating environments. Installation, connection and commissioning procedures are extremely quick and convenient with instructions attached to the unit.
Features
-
Trouble-free choice for all open loop applications
-
Standard unit fulfills EMC requirements for industrial, public and residential environments
-
IP21/Type 1 and IP54/Type 12 protection classes
-
Installation instructions integrated into each unit
-
High starting torque and dynamics due to open-loop vector control
-
High switching frequency (up to 16 kHz, 6 kHz standard)
-
Standard control I/O with option to be extended. RS485 integrated as standard
Benefits
-
No additional cabinets required
-
Everything integrated as standard (dust/water protection, RFI filter, AC choke, brake chopper)
-
Easy to install, easy to use
-
Large amount of control possibilities (via I/Os, field buses or display panel)
-
Large amount of features (e.g. fully programmable I/O, auto-identification, PID controller, flying start)
-
High performance
Now what you're after? View all AC drives.
VACON 10
VACON 10 – As easy as possible
VACON 10 is a compact drive designed for applications where simplicity and efficiency are key requirements. All the functionality is built into a single unit, with the option of DIN-rail mounting available to enable quick and easy installation and handling time. A forced cooled heat sink is a key feature in facilitating its compact size.
Features
-
Easy-to-use push button interface
-
Wide standard I/O
-
Temperature controlled cooling fan
-
Side-by-side mounting
-
Built-in EMC filter
-
Built-in PI controller DIN-rail mounting available
Benefits
-
Short installation time
-
Fast commissioning
-
Space-saving design
-
Parameter copying without main power
VACON 20 Cold Plate
VACON 20 Cold Plate – Flexibility in Cooling
The VACON 20 Cold Plate has all the same functionality as the VACON 20, including built-in PLC functionality according to IEC61131-3 and a similar power range. What sets it apart is a unique passive cooling solution that allows the drive to work under the most demanding circumstances. Heat loss in AC drives can often affect surrounding machinery, particularly in compact drives that are mounted in a tight space without sufficient airflow. VACON 20 Cold Plate’s special cooling solution sidesteps this issue. Heat loss from the drive can be reduced in two ways: by being attached to a heat sink with large cooling ribs, or alternatively, by utilizing a liquid-cooled solution. You can choose the best solution depending on the situation. Easy and quick installation make it a great OEM drive, as does the slender, economical design which allows it to fit into the tightest of spaces.
Features
-
Power range up to 7.5 kW
-
Available in voltages 380-480V
-
Cold plate cooling
-
Unique low depth design
-
Safe Torque Off (STO) mode in accordance with SIL2
-
Ambient temperature rating up to 70°C
-
Induction and permanent magnet (PM) motor control
-
Integrated brake resistor
-
Status LEDs on drive
-
Expansion slot for I/0 or fieldbus
-
Handheld text keypad with copy function
-
Single plug I/0 connector for OEMs
Benefits
-
Highest cooling flexibility and performance available
-
Fast plugging of I/0 wiring
-
Custom-made software possible
-
Optimum solution with customized application software
-
Fast installation and setup
VACON 100 FLOW
VACON 100 FLOW – Intelligent Process Control
VACON 100 FLOW is an AC drive dedicated to improving flow control in Building Automation and Water & Wastewater applications. It combines core functionality of VACON 100 with features that are specifically designed for flow control applications, such as Multipump solutions and application selection menus.
Features
- Power range of 0.55 kW/0.75 HP to 160 kW/250 HP
- Available in two voltage versions 208 - 240 V and 380 - 500 V
- IP21/UL Type 1 or IP54/UL Type 12 certified enclosures
- Dedicated flow control functionality
- Multipump single drive, Multimaster and Multifollower pump control solutions as standard
- Graphical keypad with wizards and application menus
- Electrolytic-free DC link capacitors for long lifetime and high reliability
- Integrated Safe torque off (STO) option, Safe Stop and ATEX thermistor protection
- BACnet IP, Modbus TCP, Profinet IO (optional) and Ethernet IP (optional) via on-board Ethernet
- Modbus RTU, Metasys N2 and BACnet MSTP via RS485 available as standard
Benefits
- Dedicated functionality for pump, fan and compressor applications makes system integration easy and efficient
- Electrolytic-free DC link capacitors for long lifetime and minimized lifecycle cost
- Graphical keypad with wizard guides the user through commissioning and drive startup
- Built-in Ethernet and RS485 communication as standard offers efficient integration into automation systems
VACON 20 X
VACON 20 X – Performance under pressure
VACON 20 X sees Vacon utilizing its experience in producing high-class enclosed drives to offer a decentralized drive solution with countless possibilities.
An IP66/Type 4X enclosure offers the best possible protection from harsh conditions and a Gore seal allows the drive to breathe while preventing the rubber sealing from being worn down. Other great features such as large cooling ribs and an integrated main switch make VACON 20 X the right choice when your drive needs to be installed right in the field. VACON 20 X comes in the power range 0.75 kW to 7.5 kW - for motor mountable solutions providing power up to 30 kW, see VACON 100 X decentralized AC drive.
Features
-
IP66/Type 4X enclosure
-
Large cooling ribs
-
2g resistance to vibrations (according to 3M6/IEC 60068-2)
-
Option of integrated main switch
-
Safe Torque Off (STO) according to SIL3
-
Runs induction and permanent magnet motors
-
Integrated PID controller
-
Wide amount of fieldbus connections
-
Built-in EMC filter for category level C2.
-
Brake chopper integrated
Benefits
-
Cost savings from decentralized concept
-
Can be used in almost any indoor environment
-
Can be cleaned with pressurized water
-
Custom-made software solutions with built-in PLC functionality for OEMs
-
Mountable in any position; fits into any available space
VACON 10
VACON 10 – As easy as possible
VACON 10 is a compact drive designed for applications where simplicity and efficiency are key requirements. All the functionality is built into a single unit, with the option of DIN-rail mounting available to enable quick and easy installation and handling time. A forced cooled heat sink is a key feature in facilitating its compact size.
Features
-
Easy-to-use push button interface
-
Wide standard I/O
-
Temperature controlled cooling fan
-
Side-by-side mounting
-
Built-in EMC filter
-
Built-in PI controller DIN-rail mounting available
Benefits
-
Short installation time
-
Fast commissioning
-
Space-saving design
-
Parameter copying without main power
VACON 20 Cold Plate
VACON 20 Cold Plate – Flexibility in Cooling
The VACON 20 Cold Plate has all the same functionality as the VACON 20, including built-in PLC functionality according to IEC61131-3 and a similar power range. What sets it apart is a unique passive cooling solution that allows the drive to work under the most demanding circumstances. Heat loss in AC drives can often affect surrounding machinery, particularly in compact drives that are mounted in a tight space without sufficient airflow. VACON 20 Cold Plate’s special cooling solution sidesteps this issue. Heat loss from the drive can be reduced in two ways: by being attached to a heat sink with large cooling ribs, or alternatively, by utilizing a liquid-cooled solution. You can choose the best solution depending on the situation. Easy and quick installation make it a great OEM drive, as does the slender, economical design which allows it to fit into the tightest of spaces.
Features
-
Power range up to 7.5 kW
-
Available in voltages 380-480V
-
Cold plate cooling
-
Unique low depth design
-
Safe Torque Off (STO) mode in accordance with SIL2
-
Ambient temperature rating up to 70°C
-
Induction and permanent magnet (PM) motor control
-
Integrated brake resistor
-
Status LEDs on drive
-
Expansion slot for I/0 or fieldbus
-
Handheld text keypad with copy function
-
Single plug I/0 connector for OEMs
Benefits
-
Highest cooling flexibility and performance available
-
Fast plugging of I/0 wiring
-
Custom-made software possible
-
Optimum solution with customized application software
-
Fast installation and setup
VACON 100 FLOW
VACON 100 FLOW – Intelligent Process Control
VACON 100 FLOW is an AC drive dedicated to improving flow control in Building Automation and Water & Wastewater applications. It combines core functionality of VACON 100 with features that are specifically designed for flow control applications, such as Multipump solutions and application selection menus.
Features
- Power range of 0.55 kW/0.75 HP to 160 kW/250 HP
- Available in two voltage versions 208 - 240 V and 380 - 500 V
- IP21/UL Type 1 or IP54/UL Type 12 certified enclosures
- Dedicated flow control functionality
- Multipump single drive, Multimaster and Multifollower pump control solutions as standard
- Graphical keypad with wizards and application menus
- Electrolytic-free DC link capacitors for long lifetime and high reliability
- Integrated Safe torque off (STO) option, Safe Stop and ATEX thermistor protection
- BACnet IP, Modbus TCP, Profinet IO (optional) and Ethernet IP (optional) via on-board Ethernet
- Modbus RTU, Metasys N2 and BACnet MSTP via RS485 available as standard
Benefits
- Dedicated functionality for pump, fan and compressor applications makes system integration easy and efficient
- Electrolytic-free DC link capacitors for long lifetime and minimized lifecycle cost
- Graphical keypad with wizard guides the user through commissioning and drive startup
- Built-in Ethernet and RS485 communication as standard offers efficient integration into automation systems
VACON 10
VACON 10 – As easy as possible
VACON 10 is a compact drive designed for applications where simplicity and efficiency are key requirements. All the functionality is built into a single unit, with the option of DIN-rail mounting available to enable quick and easy installation and handling time. A forced cooled heat sink is a key feature in facilitating its compact size.
Features
-
Easy-to-use push button interface
-
Wide standard I/O
-
Temperature controlled cooling fan
-
Side-by-side mounting
-
Built-in EMC filter
-
Built-in PI controller DIN-rail mounting available
Benefits
-
Short installation time
-
Fast commissioning
-
Space-saving design
-
Parameter copying without main power
VACON 20 Cold Plate
VACON 20 Cold Plate – Flexibility in Cooling
The VACON 20 Cold Plate has all the same functionality as the VACON 20, including built-in PLC functionality according to IEC61131-3 and a similar power range. What sets it apart is a unique passive cooling solution that allows the drive to work under the most demanding circumstances. Heat loss in AC drives can often affect surrounding machinery, particularly in compact drives that are mounted in a tight space without sufficient airflow. VACON 20 Cold Plate’s special cooling solution sidesteps this issue. Heat loss from the drive can be reduced in two ways: by being attached to a heat sink with large cooling ribs, or alternatively, by utilizing a liquid-cooled solution. You can choose the best solution depending on the situation. Easy and quick installation make it a great OEM drive, as does the slender, economical design which allows it to fit into the tightest of spaces.
Features
-
Power range up to 7.5 kW
-
Available in voltages 380-480V
-
Cold plate cooling
-
Unique low depth design
-
Safe Torque Off (STO) mode in accordance with SIL2
-
Ambient temperature rating up to 70°C
-
Induction and permanent magnet (PM) motor control
-
Integrated brake resistor
-
Status LEDs on drive
-
Expansion slot for I/0 or fieldbus
-
Handheld text keypad with copy function
-
Single plug I/0 connector for OEMs
Benefits
-
Highest cooling flexibility and performance available
-
Fast plugging of I/0 wiring
-
Custom-made software possible
-
Optimum solution with customized application software
-
Fast installation and setup
VACON 10
VACON 10 – As easy as possible
VACON 10 is a compact drive designed for applications where simplicity and efficiency are key requirements. All the functionality is built into a single unit, with the option of DIN-rail mounting available to enable quick and easy installation and handling time. A forced cooled heat sink is a key feature in facilitating its compact size.
Features
-
Easy-to-use push button interface
-
Wide standard I/O
-
Temperature controlled cooling fan
-
Side-by-side mounting
-
Built-in EMC filter
-
Built-in PI controller DIN-rail mounting available
Benefits
-
Short installation time
-
Fast commissioning
-
Space-saving design
-
Parameter copying without main power
VACON 10
VACON 10 – As easy as possible
VACON 10 is a compact drive designed for applications where simplicity and efficiency are key requirements. All the functionality is built into a single unit, with the option of DIN-rail mounting available to enable quick and easy installation and handling time. A forced cooled heat sink is a key feature in facilitating its compact size.
Features
- Easy-to-use push button interface
- Wide standard I/O
- Temperature controlled cooling fan
- Side-by-side mounting
- Built-in EMC filter
- Built-in PI controller DIN-rail mounting available
Benefits
- Short installation time
- Fast commissioning
- Space-saving design
- Parameter copying without main power
VACON 20 Cold Plate
VACON 20 Cold Plate – Flexibility in Cooling
The VACON 20 Cold Plate has all the same functionality as the VACON 20, including built-in PLC functionality according to IEC61131-3 and a similar power range. What sets it apart is a unique passive cooling solution that allows the drive to work under the most demanding circumstances. Heat loss in AC drives can often affect surrounding machinery, particularly in compact drives that are mounted in a tight space without sufficient airflow. VACON 20 Cold Plate’s special cooling solution sidesteps this issue. Heat loss from the drive can be reduced in two ways: by being attached to a heat sink with large cooling ribs, or alternatively, by utilizing a liquid-cooled solution. You can choose the best solution depending on the situation. Easy and quick installation make it a great OEM drive, as does the slender, economical design which allows it to fit into the tightest of spaces.
Features
- Power range up to 7.5 kW
- Available in voltages 380-480V
- Cold plate cooling
- Unique low depth design
- Safe Torque Off (STO) mode in accordance with SIL2
- Ambient temperature rating up to 70°C
- Induction and permanent magnet (PM) motor control
- Integrated brake resistor
- Status LEDs on drive
- Expansion slot for I/0 or fieldbus
- Handheld text keypad with copy function
- Single plug I/0 connector for OEMs
Benefits
- Highest cooling flexibility and performance available
- Fast plugging of I/0 wiring
- Custom-made software possible
- Optimum solution with customized application software
- Fast installation and setup
VACON 100 FLOW
VACON 100 FLOW – Intelligent Process Control
VACON 100 FLOW is an AC drive dedicated to improving flow control in Building Automation and Water & Wastewater applications. It combines core functionality of VACON 100 with features that are specifically designed for flow control applications, such as Multipump solutions and application selection menus.
Features
- Power range of 0.55 kW/0.75 HP to 160 kW/250 HP
- Available in two voltage versions 208 - 240 V and 380 - 500 V
- IP21/UL Type 1 or IP54/UL Type 12 certified enclosures
- Dedicated flow control functionality
- Multipump single drive, Multimaster and Multifollower pump control solutions as standard
- Graphical keypad with wizards and application menus
- Electrolytic-free DC link capacitors for long lifetime and high reliability
- Integrated Safe torque off (STO) option, Safe Stop and ATEX thermistor protection
- BACnet IP, Modbus TCP, Profinet IO (optional) and Ethernet IP (optional) via on-board Ethernet
- Modbus RTU, Metasys N2 and BACnet MSTP via RS485 available as standard
Benefits
- Dedicated functionality for pump, fan and compressor applications makes system integration easy and efficient
- Electrolytic-free DC link capacitors for long lifetime and minimized lifecycle cost
- Graphical keypad with wizard guides the user through commissioning and drive startup
- Built-in Ethernet and RS485 communication as standard offers efficient integration into automation systems
VACON 20 X
VACON 20 X – Performance under pressure
VACON 20 X sees Vacon utilizing its experience in producing high-class enclosed drives to offer a decentralized drive solution with countless possibilities.
An IP66/Type 4X enclosure offers the best possible protection from harsh conditions and a Gore seal allows the drive to breathe while preventing the rubber sealing from being worn down. Other great features such as large cooling ribs and an integrated main switch make VACON 20 X the right choice when your drive needs to be installed right in the field. VACON 20 X comes in the power range 0.75 kW to 7.5 kW - for motor mountable solutions providing power up to 30 kW, see VACON 100 X decentralized AC drive.
Features
- IP66/Type 4X enclosure
- Large cooling ribs
- 2g resistance to vibrations (according to 3M6/IEC 60068-2)
- Option of integrated main switch
- Safe Torque Off (STO) according to SIL3
- Runs induction and permanent magnet motors
- Integrated PID controller
- Wide amount of fieldbus connections
- Built-in EMC filter for category level C2.
- Brake chopper integrated
Benefits
- Cost savings from decentralized concept
- Can be used in almost any indoor environment
- Can be cleaned with pressurized water
- Custom-made software solutions with built-in PLC functionality for OEMs
- Mountable in any position; fits into any available space
VACON NXL
VACON NXL – The easy and impressive AC drive
The Vacon NXL is a powerful standard AC drive for industrial and residential purposes in the power range from 0.75 to 30 kW.
It comes with space-saving bookshelf design, high protection classes, versatile control and programming capabilities which offer an optimal solution for all operating environments. Installation, connection and commissioning procedures are extremely quick and convenient with instructions attached to the unit.
Features
- Trouble-free choice for all open loop applications
- Standard unit fulfills EMC requirements for industrial, public and residential environments
- IP21/Type 1 and IP54/Type 12 protection classes
- Installation instructions integrated into each unit
- High starting torque and dynamics due to open-loop vector control
- High switching frequency (up to 16 kHz, 6 kHz standard)
- Standard control I/O with option to be extended. RS485 integrated as standard
Benefits
- No additional cabinets required
- Everything integrated as standard (dust/water protection, RFI filter, AC choke, brake chopper)
- Easy to install, easy to use
- Large amount of control possibilities (via I/Os, field buses or display panel)
- Large amount of features (e.g. fully programmable I/O, auto-identification, PID controller, flying start)
- High performance
Now what you're after? View all AC drives.
VACON NXS
VACON NXS – Robust drive for heavy use
The Vacon NXS is a neatly-proportioned standard AC drive in the power range of 0.75 - 560 kW and supply voltages of 208-690 V for heavy use in machines, buildings and all branches of industry.
The robust design incorporates effective protection against supply network disturbances. Reliable operation is ensured thanks to sophisticated motor control principles, motor/drive protection features, component selection and effective cooling.
Features
- IP21/Type 1 & IP54/Type 12 enclosures
- Easy to use display panel
- Interactive programming with Start-Up Wizard
- Versatile All-in-One Package
- PID controller and PFC for 1-5 pumps
- Special applications available
- Five slots for control boards (2 basic boards and 3 option boards)
- High switching frequency, low noise
- Steady state speed error < 1%
- Low torque ripple
- Starting torque > 200%, depending on AC drive sizing
- Suitable for multi-motor applications
Benefits
- Integrated high-level EMC filters make the Vacon NXS suitable for all environments.
- Start-Up Wizard and All-In-One Application Package for easy parameter setting
- Multi-monitoring system enables simultaneous monitoring of up to 3 values
- Standard I/O and option for five I/O boards provide versatile controllability.
- Most common fieldbus options available
VACON 20
VACON 20 – Possibilities and performance
VACON 20 has a performance level far beyond what you’d expect in a compact AC drive. A wide power range of up to 18.5 kW and built-in PLC functionality make it highly adaptable and its quick and easy installation process mean it is perfect for efficient volume manufacturing applications such as packaging and processing.
Features
- Wide power range up to 18.5 kW/25 HP
- Available in voltages 110-600V
- Built-in RS-485 interface for fieldbus control
- Full I/O + optional board support
- Built-in choke as option in ≥16A types
- Pulse train input
- Easy user interface
- Built-in PLC functionality based on IEC61131-3
- Built-in EMC filter
- DIN-rail mounting available
Benefits
- High functionality and performance
- Fieldbus support for many systems, including CANOpen, DeviceNet & Profibus
- Parameter copying without main power
- Custom-made software available
- Fast and easy installation and setup
Not what you're after? View all AC drives.
References
| New AC drive portfolio for OEMs
VACON 10, VACON 20 and VACON 20 Cold Plate are optimized for the needs of original equipment manufacturers (OEM). The new product range further strengthens Vacon's foothold in this high-volume AC drive market.
READ MORE > |
VACON 100
VACON 100 – 100 reasons to choose from
VACON 100 is a multipurpose drive that can be used in hundreds of different applications. Its versatility is what sets it apart from competitors, and the features it contains are designed to make it easy to run and maintain. Built-in Ethernet allows for easy integration to plant automation and VACON Live means the user can commission, maintain and monitor performance remotely. The drive can be customized for all kinds of purposes to ensure you get the most out of it, whatever the environment you need it for.
Features
- Built-in Modbus TCP and Modbus RTU. Profinet I/O or Ethernet/IP as software option
- Integrated Safe torque off (STO) option, Safe Stop and ATEX thermistor protection
- EMC compliance with integrated RFI filter.
- Integrated DC chokes
- Conformal coating
- Compact IP54/UL Type 12 with same footprint as IP21/UL Type 1
- Flange mounting
- Side by side mounting for IP54/UL Type 12
- Standard I/O + 3 free slots
- Fieldbus options, integrated PLC capability
- High efficiency >97% + energy optimization
- Energy counter
- Real time clock with calendar based functions
- Optimized control of cooling fan
- Drive Optimizer for adapting functionality
Benefits
- Compliance with global standards and approvals
- Easy integration into plant automation
- All-in-one package – no additional accessories required
- Easy and cost effective commissioning, installation and monitoring
- Suitable for wide installation needs
- Wide power range 0.55 kW to 160 kW
Now what you're after? View all AC drives.
VACON 100 HVAC
VACON 100 HVAC - Premium AC drive for indoor climate control
The VACON 100 HVAC is an AC drive with a power range of 0.55-160 kW, and for supply voltages of 230 V, 400 V or 480 V, that is dedicated to heating, ventilation and air conditioning. The VACON 100 HVAC is designed specifically for the building automation industry, and can enhance pump, fan and compressor applications.
Easy installation and efficient, trouble-free operation mean that just about anyone can commission the VACON 100 HVAC with a speedy return on investment guaranteed.
Features
- Enclosure classes IP21/Type 1 and IP54/Type 12
- BMS controller with industrial ethernet and RS485 protocols
- BACnet IP and Modbus TCP via Ethernet and Modbus RTU, Metasys N2 and BACnet MSTP via RS485 available as standard
- EMC harmonics: EN 61000-3-12 compliant
- IEC61800-5-1 (2007), UL 508 C safety approval
- CE, UL, cUL approvals
- Graphical HMI keypad
- Built-in PID controller
- Standard I/O and optional expansion cards
- Real Time Clock with battery backup
- No charge time during storage time
- RoHS compliant, no electrolytic capacitors, no lead in the circuit boards
Benefits
- Dedicated drive for HVAC applications:
- Pumps
- Fans
- Compressors (chillers)
- Built-in communication saves on investment costs
- No need for additional harmonics filter
- All circuits are designed with IEC 60721-3-3 for high immunity in demanding environments
- IP54/Type 12 units save space and costs
- Plenum-mountable to save on costs and easily integrated
VACON 100 X
VACON 100 X – A decentralized drive like no other
The VACON 100 X sets a new benchmark for decentralized drive solutions. It has a power range up to 30 kW – unmatched by competitors – and has highly advanced control capability which guarantees processes run exactly how you want them to.
A die-cast metal enclosure provides the best protection available, a breathable Gore vent protects the sealings and a heatsink cooling system which isn’t dependent on motor airflow. On top of all this, it has built-in harmonic filtering chokes, making it easy to see why this is is the ideal motor mountable solution for all sorts of applications. For a more compact solution which also provides IP66/Type 4X protection, see VACON 20 X decentralized AC drive.
Features
- IP66/Type 4X enclosure
- 3g resistance to vibrations (according to 3M7/IEC 60068-2)
- Supports both induction and permanent magnet motors
- Option of ability to operate in temperatures ranging from -40°C to 60°C
- Integrated with RS485 Modbus and Industrial Ethernet communication
- Integrated Safe Torque Off (STO) mode according to SIL3
- Built-in EMC filter for EN61800-3 category C2 (C1 as option)
- DC choke and film capacitor meets EN61000-3-12 requirements
- Integrated brake chopper
- PTC input as standard
Benefits
- Able to withstand rough conditions such as heat, dirt and vibrations
- Easy to keep clean
- Approval for public networks makes it flexible for installation
- Vacon Programming enables top class integration for countless OEM applications
- High efficiency and simulated air flow ensure long lifetime
- Motor/machine Mountable in any position; fits into any available space
Not what you're after? View all AC drives.
References
| VACON® 100 X & VACON® 20 X – Decentralized drives with unmatched protection
During the second week of June, Vacon’s customers and friends, flocked to Vaasa on the west coast of Finland for the Vacon Drives Conference 2012. One of the most exciting aspects of the week’s festivities was the launch of two new decentralized products: VACON 100 X & VACON 20 X.
READ MORE > |
| Stick your drive where it belongs!
The right place to mount an ac drive in many applications is on the motor it is controlling. Read more on the benefits of motor-mounted drives and Vacon´s offering in the field.
READ MORE > |
没有评论:
发表评论