Field-oriented vector inverter ADV200
( )
-
The new inverter series “SIEIDrive ADV200” represents an innovative concept in drive technology, as a result of the constant technological research and of the experience that the Gefran Group has acquired keeping a constant presence aside that of the major sector players.
The new range has been engineered and developed to satisfy the real needs of System Integrators and OEM’s in order to provide them the best innovations and economical competitiveness in the international markets.
Based on full mechanical modularity and on a powerful, intuitive and “fully open” programming platform, ADV200 offers absolute integration flexibility with high-end performance in any system architectures of the most advanced automation environments.
Functions:
Self-tuning rotational and stand still of speed-current-flux regulators and motor data identification
Torque control
Simplified Start-up menu
Instantaneous Overload up to 180%
Motor, Drive and Braking resistor I2t thermal protection
Multispeed function (16 programmable preset)
4 independent programmable Multi-ramp with jerks
Motorpotentiometer function
Flying restart function
Droop function
Double motor parameters setting
PID block function (application pre-charged)
Mains loss detection managed through controlled stop and/or energy optimization
Variable switching frequency
CT an VT operating mode
Advanced programming via MDPLC tool (IEC 61131-3 standard environment)
Memory Keypad with 5 parameters set
Options:
I/O expansion cards, configurable according to the customer's machine needs
Expansion cards for the management of auxiliary encoders
Field-bus interface cards: ProfiBus , CANopen, DeviceNet, GDNet
Safety Stop card in accordance with EN 954-1 (Cat.3)
Dedicated EMC filters (in compliance with CEE - EN61800-3:2004)
Braking resistors (standardized for the whole line)
Output chokes (standardized for the whole line)
IP54 with external heatsink
NEMA 1 protection degree with optional kit
Field oriented vector AC Drive ADV100
( )
-
The GEFRAN range of ADV100 inverters is specifically designed to give the utmost flexibility of application to modern automation systems and ensure ease of use, while guaranteeing advanced control capabilities for all asynchronous motors.
It features an intuitive programming environment to enable immediate motor start-up and system functions to implement control architectures for the most advanced application solutions, all with maximum energy efficiency.
The ADV100 is based on a fully modular structure with a choice of standard configurations, optional cards and integrated accessories such as EMC filters and mains chokes. All these elements offer real advantages in terms of product optimisation and savings in panel space and wiring costs, bringing considerable economic benefits.
Functions:
• Brake Control of electromechanical parking brake mounted on the motor;
• 16 multispeeds and 4 multiramps (linear, S-shaped with independent jerk settings);
• Dedicated function for Energy Saving;
• PID controller, with value settings in engineering units;
• Two self-tuning Modes.
Options:
• Multilingual programming keypad with LCD screen (5 lines x 20 characters) and memory for 5 parameter sets;
• EMC filter;
• Input choke (standard from size 4300);
• Output chokes;
• Braking resistors;
• Incremental digital encoder feedback card (EXP-DE-I1R1F2-ADL);
• I/O expansion cards (EXP-IO-…-ADL).
Sensorless vector inverter ADV80
( )
-
The ADV80 series brings together in a single product all the features required in modern industrial processes, to satisfy the demands of OEM and System integrators who require advanced and practical technical solutions. The series is particularly advantageous in terms of space and cost.
Compact and functional, the ADV80 has been engineered and built in order to realise in a flexible and efficient way all the different application requirements in the field of automation, integrating advanced functions and system configuration solutions, which before were only possible through external options.
Functions:
Motor parameters self tuning
Programmable and predefined V/f curves
4 Independent programmable ramps
16 Programmable multispeed
“Autocapture” function (Pick up)
Mains loss detection with controlled stop
Programmable autorestart
PID Application block
Energy saving function
Critical frequencies rejection
Motor thermal protection
Virtual and remoter I/O standard management
Area with programmable logic.
Options:
I/O expansion card “EXP-D6A1R1-QX”
ProfiBus interface card “SBI-PDP-QX”
Dedicated EMC filters (in compliance with the directive CEE - EN 61800-3)
Braking resistors (standardised for the whole line)
Input and Output choke (standardised for the whole line)
NEMA 1 type Kit.
Sensorless Vector ADV50
( )
-
The Inverter SIEIDrive – ADV50 concentrates all the characteristics required by modern industrial processes in a single product while at the same time complying with the typical needs of installers and system integrators who require forefront, practical solutions that are, above all, advantageous in terms of space and cost.
The ADV50, with its high level functions and integrated PLC, is the ideal solution to cater to the wide range of different application requirements of the automation sector, providing a simple but powerful method of operation and programming of the most modern control systems.
Applications: Roller door, Small elevator, Escalator, Parking device, X-Y axis of travelling crane; Dumpling maker, Food stirrer, Grinder, Small lathe, Milling machines, Injection molding (clamp); 4 side planer, Woodcarver, Wood working machine; Wastewater processing system, Costant pressure water treatment system, Air compressor; Heat exchange fans, Building water dispenser system; Round weaver, Cross weaver, Ribbon weaver, Printing press, Knitting machines; Pulverizer, Treadmil, Feeder, Industrial washing machine, Packing machine, Centrifuge.
Functions:
3 points adjustable V/f curve
Automatic Voltage Regulation (AVR)
Accel/decel S-Curve
Over-voltage/over-current stall prevention
5 fault records
Reverse inhibition
Momentary power loss restart
DC braking
Auto torque/slip compensation
Auto tuning adjustable carrier frequency
Output frequency limits
Parameter lock/reset
Built-in PID feedback control
Built-in PLC function
External counter
MODBUS communication
Abnormal reset
Abnormal re-start
Power-saving
Fan control
Sleep/wake frequency
1st/2nd frequency source selections
1st/2nd frequency source combination
NPN/PNP selection
Complete protection function
Options:
• Keypad
• Digital I/O Expansion cards
• DeviceNet module
• Profibus module
• CANopen module
• DIN-rail adapters
• Earthing plate
• USB-RS485 RJ45 Converter
• Braking Unit Module
• Standard keypad extension cable 2 mt
• Options on request only: Relays Expansion cards, Encoder Expansion card, USB 1.1 Expansion card, LonWorks module, Zero Phase Reactor, Digital Keypad for parameters copy
V/f inverter ADV20
( )
-
The Inverter SIEIDrive – ADV20 series concentrates all the characteristics required by modern industrial processes in a single product while at the same time complying with the typical needs of installers and system integrators who require forefront, practical solutions that are, above all, advantageous in terms of space and cost.
The ADV20, compact, functional and complete with high level functions and specific solutions for configuration of the most modern control systems, is the ideal solution to cater to the wide range of different application requirements of the automation sector
Applications: Conveyor belt, Automatic doors, Roller door, Escalator, Dumpling maker, Food stirrer, Noodle maker, Drill, Small lathe, Milling machines, Wood working machine, Simple cutting machine for wood working, Spraying machine, Wastewater processing system, Costant pressure water treatment system, Water treatment pump, Agricoltural pump, Temperature control of middle/large oven, Dryer's windmill Round weaver, Cross weaver, Ribbon weaver, Industrial sewing machine, Knitting machines, Ironing machine, Treadmil, Feeder, Car washing machine, Liquid mixer.
Functions:
3 points adjustable V/f curve
Automatic Voltage Regulation (AVR)
Accel/decel S-Curve
Over-voltage/over-current stall prevention
5 fault records
Reverse inhibition
Momentary power loss restart
DC braking
Auto torque/slip compensation
Auto tuning adjustable carrier frequency
Output frequency limits
Parameter lock/reset
Built-in PID feedback control
External counter
MODBUS communication
Abnormal reset
Abnormal re-start
Power-saving
Fan control
Sleep/wake frequency
1st/2nd frequency source selections
1st/2nd frequency source combination
NPN/PNP selection
Complete protection function
Options:
• DeviceNet module
• Profibus module
• CANopen module
• DIN-rail adapter for ADV20 size 1
• Earthing plate
• USB-RS485 RJ45 Converter
• Braking Unit Module
• Options on request only: LonWorks module, Zero Phase Reactor, Digital Keypad for parameters copy
Vector inverter for lifts with synchronous/asynchronous motors ADL200
( )
-
The SIEIDrive ADL200 is the result of GEFRAN’s experience in the civil lift engineering sector, gained from its commitment to working in close partnership with leading operators in the sector to develop technical solutions and application programs.
The ADL200 integrates the most complete and advanced lift inverter technology, for maximum synergy with the full range of installation requirements but, above all, to offer a cost-effective and immediate solution for lift control systems.
This versatile technology platform is suitable for all roomless and standard system configurations, with or without reduction gears. It is easy and comprehensible for users at any level and is particularly convenient thanks to the use of a single product to control every type of system.
The high-performance 32-bit hardware platform provides high-speed calculations and incorporates the regulation algorithms for synchronous and asynchronous motors with closed loop control and a powerful sensorless algorithm.
Designed and developed exclusively for the lift sector, the ADL200 incorporates the most innovative and complete lift inverter technology. It includes solutions compatible with every type of power supply and a wide range of power ratings, built to meet existing and future standards and regulations.
Functions:
• Speed control
EFC (Elevator Floor Control) function: direct arrival at the floor and automatic calculation of deceleration point.
• Position control
EPC (Elevator Positioning Control) function: position regulator for automatic management of direct arrival at the floor, automatic speed control and saving of floor distances (system autotuning).
• Lift sequence
Typical sequence of input/output signals, I/O management, braking, output contactor and door control.
• Easy to read parameters in customer units
Availability of different engineering units for the main parameters, rpm or m/s for speed, m/s², m/s³ for cabin acceleration.
• Lift mechanical parameters
Mechanical system parameters such as pulley diameter and speed ratio for converting system units and weights, system for calculating inertia and speed regulation for the desired response.
• Ramp generation
Independent configuration of acceleration and deceleration ramp parameters and of the 4 jerk values for maximum travelling comfort in the lift cabin. Two independent S-shaped ramps, selectable via digital input with 4 independent jerk settings. Dedicated deceleration ramp corresponding to the stop command.
• Multiple speeds
8 internally settable speed reference values. Possibility of overwriting at start-up with additional values to ensure
smooth starting.
• Pre-torque (load compensation)
Initialisation of the speed regulator by the load cell sensor for smooth starting.
• Overload
Overload capacity optimised for typical lift application load cycles.
• Automatic fan control
The cooling fan control logic activates the internal fans according to the temperature.
• Emergency single-phase return to the floor power supply capability
In emergency conditions a 230 V single-phase supply voltage can be used to return the car to the floor (by UPS power supply or batteries with EMS module)
• Commissioning Wizard functionality
Wizard menu for immediate system start-up
Options:
KB_ADL multilingual programming keypad with memory
SD card for storing machine data
EMS (emergency supply module)
Dedicated EMC filters (in compliance with CEE-EN 61800-3)
External braking resistors
AC and DC input chokes
Vector inverter for motors Brushless with built-in power recovery AVRy
( )
-
The AVRy series inverter offers the latest technology to meet the high demands of today’s civil lift engineering sector.
It’s the single solution that provides cutting edge control for both asynchronous and synchronous motors used in the lift industry.
AVRy’s advanced features, including its “clean energy” recovery technology (harmonic distortion of input current < 4%), and high performance in terms of the dynamics and comfort of installation, guarantee considerable savings in operating energy costs.
Dedicated features:
• Lift sequence
• Parameters in linear unit
• Lift mechanical parameters
• Ramp generation
• Landing control
• User-friendly menu
VTdrive
Vector inverter for lifts with asynchronous motors ADL100
( )
-
Derived from the ADL200, the ADL100 series is the "Entry level" range for simple, low-speed systems:
• For asynchronous motors only
• control: Advanced V/f SSC (Sensorless Scalar Control) – SLS – FOC (*)
• (*) digital encoder card in ADL120 versions only
• Simplified I/O configuration
• optional external EMC filter
• SD card and fieldbus not available
• terminal strips are not extractable.
Functions:
• Speed control
EFC (Elevator Floor Control) function: direct arrival at the floor and automatic calculation of deceleration point.
• Lift sequence
Typical sequence of input/output signals, I/O management, braking, output contactor and door control.
• Easy to read parameters in customer units
Availability of different engineering units for the main parameters, rpm or m/s for speed, m/s², m/s³ for cabin acceleration.
• Lift mechanical parameters
Mechanical system parameters setting such as pulley diameter and speed ratio for converting system units and weights, system for calculating inertia and speed regulation for the desired response.
• Ramp generation
Independent configuration of acceleration and deceleration ramp parameters and of the 4 jerk values for maximum travelling comfort in the lift cabin. Two independent S-shaped ramps, selectable via digital input with 4 independent jerk settings. Dedicated deceleration ramp corresponding to the stop command.
• Multiple speeds
8 internally settable speed reference values. Possibility of overwriting at start-up with additional values to ensure
smooth starting.
• Pre-torque (load compensation)
Initialisation of the speed regulator by the load cell sensor for smooth starting.
• Overload
Overload capacity optimised for typical lift application load cycles.
• Automatic fan control
The cooling fan control logic activates the internal fans according to the temperature of the drive heat sink.
• Emergency return to the floor power supply capability
In emergency conditions a 230 V single-phase supply voltage can be used to return the car to the floor (by UPS power supply or batteries with EMS module)
• Commissioning Wizard functionality
Wizard menu for immediate system start-up
Options:
KB_ADL multilingual programming keypad with memory
EMS (emergency supply module)
Dedicated external EMC filters (in compliance with CEE-EN 61800-3)
External braking resistors
AC and DC input chokes
Field-oriented vector inverter ADV200
( )
-
The new inverter series “SIEIDrive ADV200” represents an innovative concept in drive technology, as a result of the constant technological research and of the experience that the Gefran Group has acquired keeping a constant presence aside that of the major sector players.
The new range has been engineered and developed to satisfy the real needs of System Integrators and OEM’s in order to provide them the best innovations and economical competitiveness in the international markets.
Based on full mechanical modularity and on a powerful, intuitive and “fully open” programming platform, ADV200 offers absolute integration flexibility with high-end performance in any system architectures of the most advanced automation environments.
Functions:
Self-tuning rotational and stand still of speed-current-flux regulators and motor data identification
Torque control
Simplified Start-up menu
Instantaneous Overload up to 180%
Motor, Drive and Braking resistor I2t thermal protection
Multispeed function (16 programmable preset)
4 independent programmable Multi-ramp with jerks
Motorpotentiometer function
Flying restart function
Droop function
Double motor parameters setting
PID block function (application pre-charged)
Mains loss detection managed through controlled stop and/or energy optimization
Variable switching frequency
CT an VT operating mode
Advanced programming via MDPLC tool (IEC 61131-3 standard environment)
Memory Keypad with 5 parameters set
Options:
I/O expansion cards, configurable according to the customer's machine needs
Expansion cards for the management of auxiliary encoders
Field-bus interface cards: ProfiBus , CANopen, DeviceNet, GDNet
Safety Stop card in accordance with EN 954-1 (Cat.3)
Dedicated EMC filters (in compliance with CEE - EN61800-3:2004)
Braking resistors (standardized for the whole line)
Output chokes (standardized for the whole line)
IP54 with external heatsink
NEMA 1 protection degree with optional kit
Field oriented vector AC Drive ADV100
( )
-
The GEFRAN range of ADV100 inverters is specifically designed to give the utmost flexibility of application to modern automation systems and ensure ease of use, while guaranteeing advanced control capabilities for all asynchronous motors.
It features an intuitive programming environment to enable immediate motor start-up and system functions to implement control architectures for the most advanced application solutions, all with maximum energy efficiency.
The ADV100 is based on a fully modular structure with a choice of standard configurations, optional cards and integrated accessories such as EMC filters and mains chokes. All these elements offer real advantages in terms of product optimisation and savings in panel space and wiring costs, bringing considerable economic benefits.
Functions:
• Brake Control of electromechanical parking brake mounted on the motor;
• 16 multispeeds and 4 multiramps (linear, S-shaped with independent jerk settings);
• Dedicated function for Energy Saving;
• PID controller, with value settings in engineering units;
• Two self-tuning Modes.
Options:
• Multilingual programming keypad with LCD screen (5 lines x 20 characters) and memory for 5 parameter sets;
• EMC filter;
• Input choke (standard from size 4300);
• Output chokes;
• Braking resistors;
• Incremental digital encoder feedback card (EXP-DE-I1R1F2-ADL);
• I/O expansion cards (EXP-IO-…-ADL).
Sensorless vector inverter ADV80
( )
-
The ADV80 series brings together in a single product all the features required in modern industrial processes, to satisfy the demands of OEM and System integrators who require advanced and practical technical solutions. The series is particularly advantageous in terms of space and cost.
Compact and functional, the ADV80 has been engineered and built in order to realise in a flexible and efficient way all the different application requirements in the field of automation, integrating advanced functions and system configuration solutions, which before were only possible through external options.
Functions:
Motor parameters self tuning
Programmable and predefined V/f curves
4 Independent programmable ramps
16 Programmable multispeed
“Autocapture” function (Pick up)
Mains loss detection with controlled stop
Programmable autorestart
PID Application block
Energy saving function
Critical frequencies rejection
Motor thermal protection
Virtual and remoter I/O standard management
Area with programmable logic.
Options:
I/O expansion card “EXP-D6A1R1-QX”
ProfiBus interface card “SBI-PDP-QX”
Dedicated EMC filters (in compliance with the directive CEE - EN 61800-3)
Braking resistors (standardised for the whole line)
Input and Output choke (standardised for the whole line)
NEMA 1 type Kit.
Sensorless Vector ADV50
( )
-
The Inverter SIEIDrive – ADV50 concentrates all the characteristics required by modern industrial processes in a single product while at the same time complying with the typical needs of installers and system integrators who require forefront, practical solutions that are, above all, advantageous in terms of space and cost.
The ADV50, with its high level functions and integrated PLC, is the ideal solution to cater to the wide range of different application requirements of the automation sector, providing a simple but powerful method of operation and programming of the most modern control systems.
Applications: Roller door, Small elevator, Escalator, Parking device, X-Y axis of travelling crane; Dumpling maker, Food stirrer, Grinder, Small lathe, Milling machines, Injection molding (clamp); 4 side planer, Woodcarver, Wood working machine; Wastewater processing system, Costant pressure water treatment system, Air compressor; Heat exchange fans, Building water dispenser system; Round weaver, Cross weaver, Ribbon weaver, Printing press, Knitting machines; Pulverizer, Treadmil, Feeder, Industrial washing machine, Packing machine, Centrifuge.
Functions:
3 points adjustable V/f curve
Automatic Voltage Regulation (AVR)
Accel/decel S-Curve
Over-voltage/over-current stall prevention
5 fault records
Reverse inhibition
Momentary power loss restart
DC braking
Auto torque/slip compensation
Auto tuning adjustable carrier frequency
Output frequency limits
Parameter lock/reset
Built-in PID feedback control
Built-in PLC function
External counter
MODBUS communication
Abnormal reset
Abnormal re-start
Power-saving
Fan control
Sleep/wake frequency
1st/2nd frequency source selections
1st/2nd frequency source combination
NPN/PNP selection
Complete protection function
Options:
• Keypad
• Digital I/O Expansion cards
• DeviceNet module
• Profibus module
• CANopen module
• DIN-rail adapters
• Earthing plate
• USB-RS485 RJ45 Converter
• Braking Unit Module
• Standard keypad extension cable 2 mt
• Options on request only: Relays Expansion cards, Encoder Expansion card, USB 1.1 Expansion card, LonWorks module, Zero Phase Reactor, Digital Keypad for parameters copy
V/f inverter ADV20
( )
-
The Inverter SIEIDrive – ADV20 series concentrates all the characteristics required by modern industrial processes in a single product while at the same time complying with the typical needs of installers and system integrators who require forefront, practical solutions that are, above all, advantageous in terms of space and cost.
The ADV20, compact, functional and complete with high level functions and specific solutions for configuration of the most modern control systems, is the ideal solution to cater to the wide range of different application requirements of the automation sector
Applications: Conveyor belt, Automatic doors, Roller door, Escalator, Dumpling maker, Food stirrer, Noodle maker, Drill, Small lathe, Milling machines, Wood working machine, Simple cutting machine for wood working, Spraying machine, Wastewater processing system, Costant pressure water treatment system, Water treatment pump, Agricoltural pump, Temperature control of middle/large oven, Dryer's windmill Round weaver, Cross weaver, Ribbon weaver, Industrial sewing machine, Knitting machines, Ironing machine, Treadmil, Feeder, Car washing machine, Liquid mixer.
Functions:
3 points adjustable V/f curve
Automatic Voltage Regulation (AVR)
Accel/decel S-Curve
Over-voltage/over-current stall prevention
5 fault records
Reverse inhibition
Momentary power loss restart
DC braking
Auto torque/slip compensation
Auto tuning adjustable carrier frequency
Output frequency limits
Parameter lock/reset
Built-in PID feedback control
External counter
MODBUS communication
Abnormal reset
Abnormal re-start
Power-saving
Fan control
Sleep/wake frequency
1st/2nd frequency source selections
1st/2nd frequency source combination
NPN/PNP selection
Complete protection function
Options:
• DeviceNet module
• Profibus module
• CANopen module
• DIN-rail adapter for ADV20 size 1
• Earthing plate
• USB-RS485 RJ45 Converter
• Braking Unit Module
• Options on request only: LonWorks module, Zero Phase Reactor, Digital Keypad for parameters copy
Vector inverter for lifts with synchronous/asynchronous motors ADL200
( )
-
The SIEIDrive ADL200 is the result of GEFRAN’s experience in the civil lift engineering sector, gained from its commitment to working in close partnership with leading operators in the sector to develop technical solutions and application programs.
The ADL200 integrates the most complete and advanced lift inverter technology, for maximum synergy with the full range of installation requirements but, above all, to offer a cost-effective and immediate solution for lift control systems.
This versatile technology platform is suitable for all roomless and standard system configurations, with or without reduction gears. It is easy and comprehensible for users at any level and is particularly convenient thanks to the use of a single product to control every type of system.
The high-performance 32-bit hardware platform provides high-speed calculations and incorporates the regulation algorithms for synchronous and asynchronous motors with closed loop control and a powerful sensorless algorithm.
Designed and developed exclusively for the lift sector, the ADL200 incorporates the most innovative and complete lift inverter technology. It includes solutions compatible with every type of power supply and a wide range of power ratings, built to meet existing and future standards and regulations.
Functions:
• Speed control
EFC (Elevator Floor Control) function: direct arrival at the floor and automatic calculation of deceleration point.
• Position control
EPC (Elevator Positioning Control) function: position regulator for automatic management of direct arrival at the floor, automatic speed control and saving of floor distances (system autotuning).
• Lift sequence
Typical sequence of input/output signals, I/O management, braking, output contactor and door control.
• Easy to read parameters in customer units
Availability of different engineering units for the main parameters, rpm or m/s for speed, m/s², m/s³ for cabin acceleration.
• Lift mechanical parameters
Mechanical system parameters such as pulley diameter and speed ratio for converting system units and weights, system for calculating inertia and speed regulation for the desired response.
• Ramp generation
Independent configuration of acceleration and deceleration ramp parameters and of the 4 jerk values for maximum travelling comfort in the lift cabin. Two independent S-shaped ramps, selectable via digital input with 4 independent jerk settings. Dedicated deceleration ramp corresponding to the stop command.
• Multiple speeds
8 internally settable speed reference values. Possibility of overwriting at start-up with additional values to ensure
smooth starting.
• Pre-torque (load compensation)
Initialisation of the speed regulator by the load cell sensor for smooth starting.
• Overload
Overload capacity optimised for typical lift application load cycles.
• Automatic fan control
The cooling fan control logic activates the internal fans according to the temperature.
• Emergency single-phase return to the floor power supply capability
In emergency conditions a 230 V single-phase supply voltage can be used to return the car to the floor (by UPS power supply or batteries with EMS module)
• Commissioning Wizard functionality
Wizard menu for immediate system start-up
Options:
KB_ADL multilingual programming keypad with memory
SD card for storing machine data
EMS (emergency supply module)
Dedicated EMC filters (in compliance with CEE-EN 61800-3)
External braking resistors
AC and DC input chokes
Vector inverter for motors Brushless with built-in power recovery AVRy
( )
-
The AVRy series inverter offers the latest technology to meet the high demands of today’s civil lift engineering sector.
It’s the single solution that provides cutting edge control for both asynchronous and synchronous motors used in the lift industry.
AVRy’s advanced features, including its “clean energy” recovery technology (harmonic distortion of input current < 4%), and high performance in terms of the dynamics and comfort of installation, guarantee considerable savings in operating energy costs.
Dedicated features:
• Lift sequence
• Parameters in linear unit
• Lift mechanical parameters
• Ramp generation
• Landing control
• User-friendly menu
Field-oriented vector inverter ADV200
( )
-
The new inverter series “SIEIDrive ADV200” represents an innovative concept in drive technology, as a result of the constant technological research and of the experience that the Gefran Group has acquired keeping a constant presence aside that of the major sector players.
The new range has been engineered and developed to satisfy the real needs of System Integrators and OEM’s in order to provide them the best innovations and economical competitiveness in the international markets.
Based on full mechanical modularity and on a powerful, intuitive and “fully open” programming platform, ADV200 offers absolute integration flexibility with high-end performance in any system architectures of the most advanced automation environments.
Functions:
Self-tuning rotational and stand still of speed-current-flux regulators and motor data identification
Torque control
Simplified Start-up menu
Instantaneous Overload up to 180%
Motor, Drive and Braking resistor I2t thermal protection
Multispeed function (16 programmable preset)
4 independent programmable Multi-ramp with jerks
Motorpotentiometer function
Flying restart function
Droop function
Double motor parameters setting
PID block function (application pre-charged)
Mains loss detection managed through controlled stop and/or energy optimization
Variable switching frequency
CT an VT operating mode
Advanced programming via MDPLC tool (IEC 61131-3 standard environment)
Memory Keypad with 5 parameters set
Options:
I/O expansion cards, configurable according to the customer's machine needs
Expansion cards for the management of auxiliary encoders
Field-bus interface cards: ProfiBus , CANopen, DeviceNet, GDNet
Safety Stop card in accordance with EN 954-1 (Cat.3)
Dedicated EMC filters (in compliance with CEE - EN61800-3:2004)
Braking resistors (standardized for the whole line)
Output chokes (standardized for the whole line)
IP54 with external heatsink
NEMA 1 protection degree with optional kit
Field oriented vector AC Drive ADV100
( )
-
The GEFRAN range of ADV100 inverters is specifically designed to give the utmost flexibility of application to modern automation systems and ensure ease of use, while guaranteeing advanced control capabilities for all asynchronous motors.
It features an intuitive programming environment to enable immediate motor start-up and system functions to implement control architectures for the most advanced application solutions, all with maximum energy efficiency.
The ADV100 is based on a fully modular structure with a choice of standard configurations, optional cards and integrated accessories such as EMC filters and mains chokes. All these elements offer real advantages in terms of product optimisation and savings in panel space and wiring costs, bringing considerable economic benefits.
Functions:
• Brake Control of electromechanical parking brake mounted on the motor;
• 16 multispeeds and 4 multiramps (linear, S-shaped with independent jerk settings);
• Dedicated function for Energy Saving;
• PID controller, with value settings in engineering units;
• Two self-tuning Modes.
Options:
• Multilingual programming keypad with LCD screen (5 lines x 20 characters) and memory for 5 parameter sets;
• EMC filter;
• Input choke (standard from size 4300);
• Output chokes;
• Braking resistors;
• Incremental digital encoder feedback card (EXP-DE-I1R1F2-ADL);
• I/O expansion cards (EXP-IO-…-ADL).
Sensorless vector inverter ADV80
( )
-
The ADV80 series brings together in a single product all the features required in modern industrial processes, to satisfy the demands of OEM and System integrators who require advanced and practical technical solutions. The series is particularly advantageous in terms of space and cost.
Compact and functional, the ADV80 has been engineered and built in order to realise in a flexible and efficient way all the different application requirements in the field of automation, integrating advanced functions and system configuration solutions, which before were only possible through external options.
Functions:
Motor parameters self tuning
Programmable and predefined V/f curves
4 Independent programmable ramps
16 Programmable multispeed
“Autocapture” function (Pick up)
Mains loss detection with controlled stop
Programmable autorestart
PID Application block
Energy saving function
Critical frequencies rejection
Motor thermal protection
Virtual and remoter I/O standard management
Area with programmable logic.
Options:
I/O expansion card “EXP-D6A1R1-QX”
ProfiBus interface card “SBI-PDP-QX”
Dedicated EMC filters (in compliance with the directive CEE - EN 61800-3)
Braking resistors (standardised for the whole line)
Input and Output choke (standardised for the whole line)
NEMA 1 type Kit.
Sensorless Vector ADV50
( )
-
The Inverter SIEIDrive – ADV50 concentrates all the characteristics required by modern industrial processes in a single product while at the same time complying with the typical needs of installers and system integrators who require forefront, practical solutions that are, above all, advantageous in terms of space and cost.
The ADV50, with its high level functions and integrated PLC, is the ideal solution to cater to the wide range of different application requirements of the automation sector, providing a simple but powerful method of operation and programming of the most modern control systems.
Applications: Roller door, Small elevator, Escalator, Parking device, X-Y axis of travelling crane; Dumpling maker, Food stirrer, Grinder, Small lathe, Milling machines, Injection molding (clamp); 4 side planer, Woodcarver, Wood working machine; Wastewater processing system, Costant pressure water treatment system, Air compressor; Heat exchange fans, Building water dispenser system; Round weaver, Cross weaver, Ribbon weaver, Printing press, Knitting machines; Pulverizer, Treadmil, Feeder, Industrial washing machine, Packing machine, Centrifuge.
Functions:
3 points adjustable V/f curve
Automatic Voltage Regulation (AVR)
Accel/decel S-Curve
Over-voltage/over-current stall prevention
5 fault records
Reverse inhibition
Momentary power loss restart
DC braking
Auto torque/slip compensation
Auto tuning adjustable carrier frequency
Output frequency limits
Parameter lock/reset
Built-in PID feedback control
Built-in PLC function
External counter
MODBUS communication
Abnormal reset
Abnormal re-start
Power-saving
Fan control
Sleep/wake frequency
1st/2nd frequency source selections
1st/2nd frequency source combination
NPN/PNP selection
Complete protection function
Options:
• Keypad
• Digital I/O Expansion cards
• DeviceNet module
• Profibus module
• CANopen module
• DIN-rail adapters
• Earthing plate
• USB-RS485 RJ45 Converter
• Braking Unit Module
• Standard keypad extension cable 2 mt
• Options on request only: Relays Expansion cards, Encoder Expansion card, USB 1.1 Expansion card, LonWorks module, Zero Phase Reactor, Digital Keypad for parameters copy
V/f inverter ADV20
( )
-
The Inverter SIEIDrive – ADV20 series concentrates all the characteristics required by modern industrial processes in a single product while at the same time complying with the typical needs of installers and system integrators who require forefront, practical solutions that are, above all, advantageous in terms of space and cost.
The ADV20, compact, functional and complete with high level functions and specific solutions for configuration of the most modern control systems, is the ideal solution to cater to the wide range of different application requirements of the automation sector
Applications: Conveyor belt, Automatic doors, Roller door, Escalator, Dumpling maker, Food stirrer, Noodle maker, Drill, Small lathe, Milling machines, Wood working machine, Simple cutting machine for wood working, Spraying machine, Wastewater processing system, Costant pressure water treatment system, Water treatment pump, Agricoltural pump, Temperature control of middle/large oven, Dryer's windmill Round weaver, Cross weaver, Ribbon weaver, Industrial sewing machine, Knitting machines, Ironing machine, Treadmil, Feeder, Car washing machine, Liquid mixer.
Functions:
3 points adjustable V/f curve
Automatic Voltage Regulation (AVR)
Accel/decel S-Curve
Over-voltage/over-current stall prevention
5 fault records
Reverse inhibition
Momentary power loss restart
DC braking
Auto torque/slip compensation
Auto tuning adjustable carrier frequency
Output frequency limits
Parameter lock/reset
Built-in PID feedback control
External counter
MODBUS communication
Abnormal reset
Abnormal re-start
Power-saving
Fan control
Sleep/wake frequency
1st/2nd frequency source selections
1st/2nd frequency source combination
NPN/PNP selection
Complete protection function
Options:
• DeviceNet module
• Profibus module
• CANopen module
• DIN-rail adapter for ADV20 size 1
• Earthing plate
• USB-RS485 RJ45 Converter
• Braking Unit Module
• Options on request only: LonWorks module, Zero Phase Reactor, Digital Keypad for parameters copy
Vector inverter for lifts with synchronous/asynchronous motors ADL200
( )
-
The SIEIDrive ADL200 is the result of GEFRAN’s experience in the civil lift engineering sector, gained from its commitment to working in close partnership with leading operators in the sector to develop technical solutions and application programs.
The ADL200 integrates the most complete and advanced lift inverter technology, for maximum synergy with the full range of installation requirements but, above all, to offer a cost-effective and immediate solution for lift control systems.
This versatile technology platform is suitable for all roomless and standard system configurations, with or without reduction gears. It is easy and comprehensible for users at any level and is particularly convenient thanks to the use of a single product to control every type of system.
The high-performance 32-bit hardware platform provides high-speed calculations and incorporates the regulation algorithms for synchronous and asynchronous motors with closed loop control and a powerful sensorless algorithm.
Designed and developed exclusively for the lift sector, the ADL200 incorporates the most innovative and complete lift inverter technology. It includes solutions compatible with every type of power supply and a wide range of power ratings, built to meet existing and future standards and regulations.
Functions:
• Speed control
EFC (Elevator Floor Control) function: direct arrival at the floor and automatic calculation of deceleration point.
• Position control
EPC (Elevator Positioning Control) function: position regulator for automatic management of direct arrival at the floor, automatic speed control and saving of floor distances (system autotuning).
• Lift sequence
Typical sequence of input/output signals, I/O management, braking, output contactor and door control.
• Easy to read parameters in customer units
Availability of different engineering units for the main parameters, rpm or m/s for speed, m/s², m/s³ for cabin acceleration.
• Lift mechanical parameters
Mechanical system parameters such as pulley diameter and speed ratio for converting system units and weights, system for calculating inertia and speed regulation for the desired response.
• Ramp generation
Independent configuration of acceleration and deceleration ramp parameters and of the 4 jerk values for maximum travelling comfort in the lift cabin. Two independent S-shaped ramps, selectable via digital input with 4 independent jerk settings. Dedicated deceleration ramp corresponding to the stop command.
• Multiple speeds
8 internally settable speed reference values. Possibility of overwriting at start-up with additional values to ensure
smooth starting.
• Pre-torque (load compensation)
Initialisation of the speed regulator by the load cell sensor for smooth starting.
• Overload
Overload capacity optimised for typical lift application load cycles.
• Automatic fan control
The cooling fan control logic activates the internal fans according to the temperature.
• Emergency single-phase return to the floor power supply capability
In emergency conditions a 230 V single-phase supply voltage can be used to return the car to the floor (by UPS power supply or batteries with EMS module)
• Commissioning Wizard functionality
Wizard menu for immediate system start-up
Options:
KB_ADL multilingual programming keypad with memory
SD card for storing machine data
EMS (emergency supply module)
Dedicated EMC filters (in compliance with CEE-EN 61800-3)
External braking resistors
AC and DC input chokes
Field-oriented vector inverter ADV200
( )
-
The new inverter series “SIEIDrive ADV200” represents an innovative concept in drive technology, as a result of the constant technological research and of the experience that the Gefran Group has acquired keeping a constant presence aside that of the major sector players.
The new range has been engineered and developed to satisfy the real needs of System Integrators and OEM’s in order to provide them the best innovations and economical competitiveness in the international markets.
Based on full mechanical modularity and on a powerful, intuitive and “fully open” programming platform, ADV200 offers absolute integration flexibility with high-end performance in any system architectures of the most advanced automation environments.
Functions:
Self-tuning rotational and stand still of speed-current-flux regulators and motor data identification
Torque control
Simplified Start-up menu
Instantaneous Overload up to 180%
Motor, Drive and Braking resistor I2t thermal protection
Multispeed function (16 programmable preset)
4 independent programmable Multi-ramp with jerks
Motorpotentiometer function
Flying restart function
Droop function
Double motor parameters setting
PID block function (application pre-charged)
Mains loss detection managed through controlled stop and/or energy optimization
Variable switching frequency
CT an VT operating mode
Advanced programming via MDPLC tool (IEC 61131-3 standard environment)
Memory Keypad with 5 parameters set
Options:
I/O expansion cards, configurable according to the customer's machine needs
Expansion cards for the management of auxiliary encoders
Field-bus interface cards: ProfiBus , CANopen, DeviceNet, GDNet
Safety Stop card in accordance with EN 954-1 (Cat.3)
Dedicated EMC filters (in compliance with CEE - EN61800-3:2004)
Braking resistors (standardized for the whole line)
Output chokes (standardized for the whole line)
IP54 with external heatsink
NEMA 1 protection degree with optional kit
Field oriented vector AC Drive ADV100
( )
-
The GEFRAN range of ADV100 inverters is specifically designed to give the utmost flexibility of application to modern automation systems and ensure ease of use, while guaranteeing advanced control capabilities for all asynchronous motors.
It features an intuitive programming environment to enable immediate motor start-up and system functions to implement control architectures for the most advanced application solutions, all with maximum energy efficiency.
The ADV100 is based on a fully modular structure with a choice of standard configurations, optional cards and integrated accessories such as EMC filters and mains chokes. All these elements offer real advantages in terms of product optimisation and savings in panel space and wiring costs, bringing considerable economic benefits.
Functions:
• Brake Control of electromechanical parking brake mounted on the motor;
• 16 multispeeds and 4 multiramps (linear, S-shaped with independent jerk settings);
• Dedicated function for Energy Saving;
• PID controller, with value settings in engineering units;
• Two self-tuning Modes.
Options:
• Multilingual programming keypad with LCD screen (5 lines x 20 characters) and memory for 5 parameter sets;
• EMC filter;
• Input choke (standard from size 4300);
• Output chokes;
• Braking resistors;
• Incremental digital encoder feedback card (EXP-DE-I1R1F2-ADL);
• I/O expansion cards (EXP-IO-…-ADL).
Sensorless vector inverter ADV80
( )
-
The ADV80 series brings together in a single product all the features required in modern industrial processes, to satisfy the demands of OEM and System integrators who require advanced and practical technical solutions. The series is particularly advantageous in terms of space and cost.
Compact and functional, the ADV80 has been engineered and built in order to realise in a flexible and efficient way all the different application requirements in the field of automation, integrating advanced functions and system configuration solutions, which before were only possible through external options.
Functions:
Motor parameters self tuning
Programmable and predefined V/f curves
4 Independent programmable ramps
16 Programmable multispeed
“Autocapture” function (Pick up)
Mains loss detection with controlled stop
Programmable autorestart
PID Application block
Energy saving function
Critical frequencies rejection
Motor thermal protection
Virtual and remoter I/O standard management
Area with programmable logic.
Options:
I/O expansion card “EXP-D6A1R1-QX”
ProfiBus interface card “SBI-PDP-QX”
Dedicated EMC filters (in compliance with the directive CEE - EN 61800-3)
Braking resistors (standardised for the whole line)
Input and Output choke (standardised for the whole line)
NEMA 1 type Kit.
Sensorless Vector ADV50
( )
-
The Inverter SIEIDrive – ADV50 concentrates all the characteristics required by modern industrial processes in a single product while at the same time complying with the typical needs of installers and system integrators who require forefront, practical solutions that are, above all, advantageous in terms of space and cost.
The ADV50, with its high level functions and integrated PLC, is the ideal solution to cater to the wide range of different application requirements of the automation sector, providing a simple but powerful method of operation and programming of the most modern control systems.
Applications: Roller door, Small elevator, Escalator, Parking device, X-Y axis of travelling crane; Dumpling maker, Food stirrer, Grinder, Small lathe, Milling machines, Injection molding (clamp); 4 side planer, Woodcarver, Wood working machine; Wastewater processing system, Costant pressure water treatment system, Air compressor; Heat exchange fans, Building water dispenser system; Round weaver, Cross weaver, Ribbon weaver, Printing press, Knitting machines; Pulverizer, Treadmil, Feeder, Industrial washing machine, Packing machine, Centrifuge.
Functions:
3 points adjustable V/f curve
Automatic Voltage Regulation (AVR)
Accel/decel S-Curve
Over-voltage/over-current stall prevention
5 fault records
Reverse inhibition
Momentary power loss restart
DC braking
Auto torque/slip compensation
Auto tuning adjustable carrier frequency
Output frequency limits
Parameter lock/reset
Built-in PID feedback control
Built-in PLC function
External counter
MODBUS communication
Abnormal reset
Abnormal re-start
Power-saving
Fan control
Sleep/wake frequency
1st/2nd frequency source selections
1st/2nd frequency source combination
NPN/PNP selection
Complete protection function
Options:
• Keypad
• Digital I/O Expansion cards
• DeviceNet module
• Profibus module
• CANopen module
• DIN-rail adapters
• Earthing plate
• USB-RS485 RJ45 Converter
• Braking Unit Module
• Standard keypad extension cable 2 mt
• Options on request only: Relays Expansion cards, Encoder Expansion card, USB 1.1 Expansion card, LonWorks module, Zero Phase Reactor, Digital Keypad for parameters copy
V/f inverter ADV20
( )
-
The Inverter SIEIDrive – ADV20 series concentrates all the characteristics required by modern industrial processes in a single product while at the same time complying with the typical needs of installers and system integrators who require forefront, practical solutions that are, above all, advantageous in terms of space and cost.
The ADV20, compact, functional and complete with high level functions and specific solutions for configuration of the most modern control systems, is the ideal solution to cater to the wide range of different application requirements of the automation sector
Applications: Conveyor belt, Automatic doors, Roller door, Escalator, Dumpling maker, Food stirrer, Noodle maker, Drill, Small lathe, Milling machines, Wood working machine, Simple cutting machine for wood working, Spraying machine, Wastewater processing system, Costant pressure water treatment system, Water treatment pump, Agricoltural pump, Temperature control of middle/large oven, Dryer's windmill Round weaver, Cross weaver, Ribbon weaver, Industrial sewing machine, Knitting machines, Ironing machine, Treadmil, Feeder, Car washing machine, Liquid mixer.
Functions:
3 points adjustable V/f curve
Automatic Voltage Regulation (AVR)
Accel/decel S-Curve
Over-voltage/over-current stall prevention
5 fault records
Reverse inhibition
Momentary power loss restart
DC braking
Auto torque/slip compensation
Auto tuning adjustable carrier frequency
Output frequency limits
Parameter lock/reset
Built-in PID feedback control
External counter
MODBUS communication
Abnormal reset
Abnormal re-start
Power-saving
Fan control
Sleep/wake frequency
1st/2nd frequency source selections
1st/2nd frequency source combination
NPN/PNP selection
Complete protection function
Options:
• DeviceNet module
• Profibus module
• CANopen module
• DIN-rail adapter for ADV20 size 1
• Earthing plate
• USB-RS485 RJ45 Converter
• Braking Unit Module
• Options on request only: LonWorks module, Zero Phase Reactor, Digital Keypad for parameters copy
Field-oriented vector inverter ADV200
( )
-
The new inverter series “SIEIDrive ADV200” represents an innovative concept in drive technology, as a result of the constant technological research and of the experience that the Gefran Group has acquired keeping a constant presence aside that of the major sector players.
The new range has been engineered and developed to satisfy the real needs of System Integrators and OEM’s in order to provide them the best innovations and economical competitiveness in the international markets.
Based on full mechanical modularity and on a powerful, intuitive and “fully open” programming platform, ADV200 offers absolute integration flexibility with high-end performance in any system architectures of the most advanced automation environments.
Functions:
Self-tuning rotational and stand still of speed-current-flux regulators and motor data identification
Torque control
Simplified Start-up menu
Instantaneous Overload up to 180%
Motor, Drive and Braking resistor I2t thermal protection
Multispeed function (16 programmable preset)
4 independent programmable Multi-ramp with jerks
Motorpotentiometer function
Flying restart function
Droop function
Double motor parameters setting
PID block function (application pre-charged)
Mains loss detection managed through controlled stop and/or energy optimization
Variable switching frequency
CT an VT operating mode
Advanced programming via MDPLC tool (IEC 61131-3 standard environment)
Memory Keypad with 5 parameters set
Options:
I/O expansion cards, configurable according to the customer's machine needs
Expansion cards for the management of auxiliary encoders
Field-bus interface cards: ProfiBus , CANopen, DeviceNet, GDNet
Safety Stop card in accordance with EN 954-1 (Cat.3)
Dedicated EMC filters (in compliance with CEE - EN61800-3:2004)
Braking resistors (standardized for the whole line)
Output chokes (standardized for the whole line)
IP54 with external heatsink
NEMA 1 protection degree with optional kit
Field oriented vector AC Drive ADV100
( )
-
The GEFRAN range of ADV100 inverters is specifically designed to give the utmost flexibility of application to modern automation systems and ensure ease of use, while guaranteeing advanced control capabilities for all asynchronous motors.
It features an intuitive programming environment to enable immediate motor start-up and system functions to implement control architectures for the most advanced application solutions, all with maximum energy efficiency.
The ADV100 is based on a fully modular structure with a choice of standard configurations, optional cards and integrated accessories such as EMC filters and mains chokes. All these elements offer real advantages in terms of product optimisation and savings in panel space and wiring costs, bringing considerable economic benefits.
Functions:
• Brake Control of electromechanical parking brake mounted on the motor;
• 16 multispeeds and 4 multiramps (linear, S-shaped with independent jerk settings);
• Dedicated function for Energy Saving;
• PID controller, with value settings in engineering units;
• Two self-tuning Modes.
Options:
• Multilingual programming keypad with LCD screen (5 lines x 20 characters) and memory for 5 parameter sets;
• EMC filter;
• Input choke (standard from size 4300);
• Output chokes;
• Braking resistors;
• Incremental digital encoder feedback card (EXP-DE-I1R1F2-ADL);
• I/O expansion cards (EXP-IO-…-ADL).
Sensorless vector inverter ADV80
( )
-
The ADV80 series brings together in a single product all the features required in modern industrial processes, to satisfy the demands of OEM and System integrators who require advanced and practical technical solutions. The series is particularly advantageous in terms of space and cost.
Compact and functional, the ADV80 has been engineered and built in order to realise in a flexible and efficient way all the different application requirements in the field of automation, integrating advanced functions and system configuration solutions, which before were only possible through external options.
Functions:
Motor parameters self tuning
Programmable and predefined V/f curves
4 Independent programmable ramps
16 Programmable multispeed
“Autocapture” function (Pick up)
Mains loss detection with controlled stop
Programmable autorestart
PID Application block
Energy saving function
Critical frequencies rejection
Motor thermal protection
Virtual and remoter I/O standard management
Area with programmable logic.
Options:
I/O expansion card “EXP-D6A1R1-QX”
ProfiBus interface card “SBI-PDP-QX”
Dedicated EMC filters (in compliance with the directive CEE - EN 61800-3)
Braking resistors (standardised for the whole line)
Input and Output choke (standardised for the whole line)
NEMA 1 type Kit.
Sensorless Vector ADV50
( )
-
The Inverter SIEIDrive – ADV50 concentrates all the characteristics required by modern industrial processes in a single product while at the same time complying with the typical needs of installers and system integrators who require forefront, practical solutions that are, above all, advantageous in terms of space and cost.
The ADV50, with its high level functions and integrated PLC, is the ideal solution to cater to the wide range of different application requirements of the automation sector, providing a simple but powerful method of operation and programming of the most modern control systems.
Applications: Roller door, Small elevator, Escalator, Parking device, X-Y axis of travelling crane; Dumpling maker, Food stirrer, Grinder, Small lathe, Milling machines, Injection molding (clamp); 4 side planer, Woodcarver, Wood working machine; Wastewater processing system, Costant pressure water treatment system, Air compressor; Heat exchange fans, Building water dispenser system; Round weaver, Cross weaver, Ribbon weaver, Printing press, Knitting machines; Pulverizer, Treadmil, Feeder, Industrial washing machine, Packing machine, Centrifuge.
Functions:
3 points adjustable V/f curve
Automatic Voltage Regulation (AVR)
Accel/decel S-Curve
Over-voltage/over-current stall prevention
5 fault records
Reverse inhibition
Momentary power loss restart
DC braking
Auto torque/slip compensation
Auto tuning adjustable carrier frequency
Output frequency limits
Parameter lock/reset
Built-in PID feedback control
Built-in PLC function
External counter
MODBUS communication
Abnormal reset
Abnormal re-start
Power-saving
Fan control
Sleep/wake frequency
1st/2nd frequency source selections
1st/2nd frequency source combination
NPN/PNP selection
Complete protection function
Options:
• Keypad
• Digital I/O Expansion cards
• DeviceNet module
• Profibus module
• CANopen module
• DIN-rail adapters
• Earthing plate
• USB-RS485 RJ45 Converter
• Braking Unit Module
• Standard keypad extension cable 2 mt
• Options on request only: Relays Expansion cards, Encoder Expansion card, USB 1.1 Expansion card, LonWorks module, Zero Phase Reactor, Digital Keypad for parameters copy
Field-oriented vector inverter ADV200
( )
-
The new inverter series “SIEIDrive ADV200” represents an innovative concept in drive technology, as a result of the constant technological research and of the experience that the Gefran Group has acquired keeping a constant presence aside that of the major sector players.
The new range has been engineered and developed to satisfy the real needs of System Integrators and OEM’s in order to provide them the best innovations and economical competitiveness in the international markets.
Based on full mechanical modularity and on a powerful, intuitive and “fully open” programming platform, ADV200 offers absolute integration flexibility with high-end performance in any system architectures of the most advanced automation environments.
Functions:
Self-tuning rotational and stand still of speed-current-flux regulators and motor data identification
Torque control
Simplified Start-up menu
Instantaneous Overload up to 180%
Motor, Drive and Braking resistor I2t thermal protection
Multispeed function (16 programmable preset)
4 independent programmable Multi-ramp with jerks
Motorpotentiometer function
Flying restart function
Droop function
Double motor parameters setting
PID block function (application pre-charged)
Mains loss detection managed through controlled stop and/or energy optimization
Variable switching frequency
CT an VT operating mode
Advanced programming via MDPLC tool (IEC 61131-3 standard environment)
Memory Keypad with 5 parameters set
Options:
I/O expansion cards, configurable according to the customer's machine needs
Expansion cards for the management of auxiliary encoders
Field-bus interface cards: ProfiBus , CANopen, DeviceNet, GDNet
Safety Stop card in accordance with EN 954-1 (Cat.3)
Dedicated EMC filters (in compliance with CEE - EN61800-3:2004)
Braking resistors (standardized for the whole line)
Output chokes (standardized for the whole line)
IP54 with external heatsink
NEMA 1 protection degree with optional kit
Field oriented vector AC Drive ADV100
( )
-
The GEFRAN range of ADV100 inverters is specifically designed to give the utmost flexibility of application to modern automation systems and ensure ease of use, while guaranteeing advanced control capabilities for all asynchronous motors.
It features an intuitive programming environment to enable immediate motor start-up and system functions to implement control architectures for the most advanced application solutions, all with maximum energy efficiency.
The ADV100 is based on a fully modular structure with a choice of standard configurations, optional cards and integrated accessories such as EMC filters and mains chokes. All these elements offer real advantages in terms of product optimisation and savings in panel space and wiring costs, bringing considerable economic benefits.
Functions:
• Brake Control of electromechanical parking brake mounted on the motor;
• 16 multispeeds and 4 multiramps (linear, S-shaped with independent jerk settings);
• Dedicated function for Energy Saving;
• PID controller, with value settings in engineering units;
• Two self-tuning Modes.
Options:
• Multilingual programming keypad with LCD screen (5 lines x 20 characters) and memory for 5 parameter sets;
• EMC filter;
• Input choke (standard from size 4300);
• Output chokes;
• Braking resistors;
• Incremental digital encoder feedback card (EXP-DE-I1R1F2-ADL);
• I/O expansion cards (EXP-IO-…-ADL).
Sensorless vector inverter ADV80
( )
-
The ADV80 series brings together in a single product all the features required in modern industrial processes, to satisfy the demands of OEM and System integrators who require advanced and practical technical solutions. The series is particularly advantageous in terms of space and cost.
Compact and functional, the ADV80 has been engineered and built in order to realise in a flexible and efficient way all the different application requirements in the field of automation, integrating advanced functions and system configuration solutions, which before were only possible through external options.
Functions:
Motor parameters self tuning
Programmable and predefined V/f curves
4 Independent programmable ramps
16 Programmable multispeed
“Autocapture” function (Pick up)
Mains loss detection with controlled stop
Programmable autorestart
PID Application block
Energy saving function
Critical frequencies rejection
Motor thermal protection
Virtual and remoter I/O standard management
Area with programmable logic.
Options:
I/O expansion card “EXP-D6A1R1-QX”
ProfiBus interface card “SBI-PDP-QX”
Dedicated EMC filters (in compliance with the directive CEE - EN 61800-3)
Braking resistors (standardised for the whole line)
Input and Output choke (standardised for the whole line)
NEMA 1 type Kit.
Field-oriented vector inverter ADV200
( )
-
The new inverter series “SIEIDrive ADV200” represents an innovative concept in drive technology, as a result of the constant technological research and of the experience that the Gefran Group has acquired keeping a constant presence aside that of the major sector players.
The new range has been engineered and developed to satisfy the real needs of System Integrators and OEM’s in order to provide them the best innovations and economical competitiveness in the international markets.
Based on full mechanical modularity and on a powerful, intuitive and “fully open” programming platform, ADV200 offers absolute integration flexibility with high-end performance in any system architectures of the most advanced automation environments.
Functions:
Self-tuning rotational and stand still of speed-current-flux regulators and motor data identification
Torque control
Simplified Start-up menu
Instantaneous Overload up to 180%
Motor, Drive and Braking resistor I2t thermal protection
Multispeed function (16 programmable preset)
4 independent programmable Multi-ramp with jerks
Motorpotentiometer function
Flying restart function
Droop function
Double motor parameters setting
PID block function (application pre-charged)
Mains loss detection managed through controlled stop and/or energy optimization
Variable switching frequency
CT an VT operating mode
Advanced programming via MDPLC tool (IEC 61131-3 standard environment)
Memory Keypad with 5 parameters set
Options:
I/O expansion cards, configurable according to the customer's machine needs
Expansion cards for the management of auxiliary encoders
Field-bus interface cards: ProfiBus , CANopen, DeviceNet, GDNet
Safety Stop card in accordance with EN 954-1 (Cat.3)
Dedicated EMC filters (in compliance with CEE - EN61800-3:2004)
Braking resistors (standardized for the whole line)
Output chokes (standardized for the whole line)
IP54 with external heatsink
NEMA 1 protection degree with optional kit
Field oriented vector AC Drive ADV100
( )
-
The GEFRAN range of ADV100 inverters is specifically designed to give the utmost flexibility of application to modern automation systems and ensure ease of use, while guaranteeing advanced control capabilities for all asynchronous motors.
It features an intuitive programming environment to enable immediate motor start-up and system functions to implement control architectures for the most advanced application solutions, all with maximum energy efficiency.
The ADV100 is based on a fully modular structure with a choice of standard configurations, optional cards and integrated accessories such as EMC filters and mains chokes. All these elements offer real advantages in terms of product optimisation and savings in panel space and wiring costs, bringing considerable economic benefits.
Functions:
• Brake Control of electromechanical parking brake mounted on the motor;
• 16 multispeeds and 4 multiramps (linear, S-shaped with independent jerk settings);
• Dedicated function for Energy Saving;
• PID controller, with value settings in engineering units;
• Two self-tuning Modes.
Options:
• Multilingual programming keypad with LCD screen (5 lines x 20 characters) and memory for 5 parameter sets;
• EMC filter;
• Input choke (standard from size 4300);
• Output chokes;
• Braking resistors;
• Incremental digital encoder feedback card (EXP-DE-I1R1F2-ADL);
• I/O expansion cards (EXP-IO-…-ADL).
Field-oriented vector inverter ADV200
( )
-
The new inverter series “SIEIDrive ADV200” represents an innovative concept in drive technology, as a result of the constant technological research and of the experience that the Gefran Group has acquired keeping a constant presence aside that of the major sector players.
The new range has been engineered and developed to satisfy the real needs of System Integrators and OEM’s in order to provide them the best innovations and economical competitiveness in the international markets.
Based on full mechanical modularity and on a powerful, intuitive and “fully open” programming platform, ADV200 offers absolute integration flexibility with high-end performance in any system architectures of the most advanced automation environments.
Functions:
Self-tuning rotational and stand still of speed-current-flux regulators and motor data identification
Torque control
Simplified Start-up menu
Instantaneous Overload up to 180%
Motor, Drive and Braking resistor I2t thermal protection
Multispeed function (16 programmable preset)
4 independent programmable Multi-ramp with jerks
Motorpotentiometer function
Flying restart function
Droop function
Double motor parameters setting
PID block function (application pre-charged)
Mains loss detection managed through controlled stop and/or energy optimization
Variable switching frequency
CT an VT operating mode
Advanced programming via MDPLC tool (IEC 61131-3 standard environment)
Memory Keypad with 5 parameters set
Options:
I/O expansion cards, configurable according to the customer's machine needs
Expansion cards for the management of auxiliary encoders
Field-bus interface cards: ProfiBus , CANopen, DeviceNet, GDNet
Safety Stop card in accordance with EN 954-1 (Cat.3)
Dedicated EMC filters (in compliance with CEE - EN61800-3:2004)
Braking resistors (standardized for the whole line)
Output chokes (standardized for the whole line)
IP54 with external heatsink
NEMA 1 protection degree with optional kit
Field-oriented vector inverter ADV200
( )
- The new inverter series “SIEIDrive ADV200” represents an innovative concept in drive technology, as a result of the constant technological research and of the experience that the Gefran Group has acquired keeping a constant presence aside that of the major sector players.
The new range has been engineered and developed to satisfy the real needs of System Integrators and OEM’s in order to provide them the best innovations and economical competitiveness in the international markets.
Based on full mechanical modularity and on a powerful, intuitive and “fully open” programming platform, ADV200 offers absolute integration flexibility with high-end performance in any system architectures of the most advanced automation environments.Functions:
Self-tuning rotational and stand still of speed-current-flux regulators and motor data identification
Torque control
Simplified Start-up menu
Instantaneous Overload up to 180%
Motor, Drive and Braking resistor I2t thermal protection
Multispeed function (16 programmable preset)
4 independent programmable Multi-ramp with jerks
Motorpotentiometer function
Flying restart function
Droop function
Double motor parameters setting
PID block function (application pre-charged)
Mains loss detection managed through controlled stop and/or energy optimization
Variable switching frequency
CT an VT operating mode
Advanced programming via MDPLC tool (IEC 61131-3 standard environment)
Memory Keypad with 5 parameters setOptions:
I/O expansion cards, configurable according to the customer's machine needs
Expansion cards for the management of auxiliary encoders
Field-bus interface cards: ProfiBus , CANopen, DeviceNet, GDNet
Safety Stop card in accordance with EN 954-1 (Cat.3)
Dedicated EMC filters (in compliance with CEE - EN61800-3:2004)
Braking resistors (standardized for the whole line)
Output chokes (standardized for the whole line)
IP54 with external heatsink
NEMA 1 protection degree with optional kit
Field oriented vector AC Drive ADV100
( )
- The GEFRAN range of ADV100 inverters is specifically designed to give the utmost flexibility of application to modern automation systems and ensure ease of use, while guaranteeing advanced control capabilities for all asynchronous motors.It features an intuitive programming environment to enable immediate motor start-up and system functions to implement control architectures for the most advanced application solutions, all with maximum energy efficiency.The ADV100 is based on a fully modular structure with a choice of standard configurations, optional cards and integrated accessories such as EMC filters and mains chokes. All these elements offer real advantages in terms of product optimisation and savings in panel space and wiring costs, bringing considerable economic benefits.Functions:• Brake Control of electromechanical parking brake mounted on the motor;• 16 multispeeds and 4 multiramps (linear, S-shaped with independent jerk settings);• Dedicated function for Energy Saving;• PID controller, with value settings in engineering units;• Two self-tuning Modes.Options:• Multilingual programming keypad with LCD screen (5 lines x 20 characters) and memory for 5 parameter sets;• EMC filter;• Input choke (standard from size 4300);• Output chokes;• Braking resistors;• Incremental digital encoder feedback card (EXP-DE-I1R1F2-ADL);• I/O expansion cards (EXP-IO-…-ADL).
Sensorless vector inverter ADV80
( )
- The ADV80 series brings together in a single product all the features required in modern industrial processes, to satisfy the demands of OEM and System integrators who require advanced and practical technical solutions. The series is particularly advantageous in terms of space and cost.
Compact and functional, the ADV80 has been engineered and built in order to realise in a flexible and efficient way all the different application requirements in the field of automation, integrating advanced functions and system configuration solutions, which before were only possible through external options.Functions:
Motor parameters self tuning
Programmable and predefined V/f curves
4 Independent programmable ramps
16 Programmable multispeed
“Autocapture” function (Pick up)
Mains loss detection with controlled stop
Programmable autorestart
PID Application block
Energy saving function
Critical frequencies rejection
Motor thermal protection
Virtual and remoter I/O standard management
Area with programmable logic.Options:
I/O expansion card “EXP-D6A1R1-QX”
ProfiBus interface card “SBI-PDP-QX”
Dedicated EMC filters (in compliance with the directive CEE - EN 61800-3)
Braking resistors (standardised for the whole line)
Input and Output choke (standardised for the whole line)
NEMA 1 type Kit.
Sensorless Vector ADV50
( )
- The Inverter SIEIDrive – ADV50 concentrates all the characteristics required by modern industrial processes in a single product while at the same time complying with the typical needs of installers and system integrators who require forefront, practical solutions that are, above all, advantageous in terms of space and cost.
The ADV50, with its high level functions and integrated PLC, is the ideal solution to cater to the wide range of different application requirements of the automation sector, providing a simple but powerful method of operation and programming of the most modern control systems.
Applications: Roller door, Small elevator, Escalator, Parking device, X-Y axis of travelling crane; Dumpling maker, Food stirrer, Grinder, Small lathe, Milling machines, Injection molding (clamp); 4 side planer, Woodcarver, Wood working machine; Wastewater processing system, Costant pressure water treatment system, Air compressor; Heat exchange fans, Building water dispenser system; Round weaver, Cross weaver, Ribbon weaver, Printing press, Knitting machines; Pulverizer, Treadmil, Feeder, Industrial washing machine, Packing machine, Centrifuge.Functions:
3 points adjustable V/f curve
Automatic Voltage Regulation (AVR)
Accel/decel S-Curve
Over-voltage/over-current stall prevention
5 fault records
Reverse inhibition
Momentary power loss restart
DC braking
Auto torque/slip compensation
Auto tuning adjustable carrier frequency
Output frequency limits
Parameter lock/reset
Built-in PID feedback control
Built-in PLC function
External counter
MODBUS communication
Abnormal reset
Abnormal re-start
Power-saving
Fan control
Sleep/wake frequency
1st/2nd frequency source selections
1st/2nd frequency source combination
NPN/PNP selection
Complete protection functionOptions:
• Keypad
• Digital I/O Expansion cards
• DeviceNet module
• Profibus module
• CANopen module
• DIN-rail adapters
• Earthing plate
• USB-RS485 RJ45 Converter
• Braking Unit Module
• Standard keypad extension cable 2 mt
• Options on request only: Relays Expansion cards, Encoder Expansion card, USB 1.1 Expansion card, LonWorks module, Zero Phase Reactor, Digital Keypad for parameters copy
V/f inverter ADV20
( )
- The Inverter SIEIDrive – ADV20 series concentrates all the characteristics required by modern industrial processes in a single product while at the same time complying with the typical needs of installers and system integrators who require forefront, practical solutions that are, above all, advantageous in terms of space and cost.
The ADV20, compact, functional and complete with high level functions and specific solutions for configuration of the most modern control systems, is the ideal solution to cater to the wide range of different application requirements of the automation sector
Applications: Conveyor belt, Automatic doors, Roller door, Escalator, Dumpling maker, Food stirrer, Noodle maker, Drill, Small lathe, Milling machines, Wood working machine, Simple cutting machine for wood working, Spraying machine, Wastewater processing system, Costant pressure water treatment system, Water treatment pump, Agricoltural pump, Temperature control of middle/large oven, Dryer's windmill Round weaver, Cross weaver, Ribbon weaver, Industrial sewing machine, Knitting machines, Ironing machine, Treadmil, Feeder, Car washing machine, Liquid mixer.Functions:
3 points adjustable V/f curve
Automatic Voltage Regulation (AVR)
Accel/decel S-Curve
Over-voltage/over-current stall prevention
5 fault records
Reverse inhibition
Momentary power loss restart
DC braking
Auto torque/slip compensation
Auto tuning adjustable carrier frequency
Output frequency limits
Parameter lock/reset
Built-in PID feedback control
External counter
MODBUS communication
Abnormal reset
Abnormal re-start
Power-saving
Fan control
Sleep/wake frequency
1st/2nd frequency source selections
1st/2nd frequency source combination
NPN/PNP selection
Complete protection functionOptions:
• DeviceNet module
• Profibus module
• CANopen module
• DIN-rail adapter for ADV20 size 1
• Earthing plate
• USB-RS485 RJ45 Converter
• Braking Unit Module
• Options on request only: LonWorks module, Zero Phase Reactor, Digital Keypad for parameters copy
Vector inverter for lifts with synchronous/asynchronous motors ADL200
( )
- The SIEIDrive ADL200 is the result of GEFRAN’s experience in the civil lift engineering sector, gained from its commitment to working in close partnership with leading operators in the sector to develop technical solutions and application programs.
The ADL200 integrates the most complete and advanced lift inverter technology, for maximum synergy with the full range of installation requirements but, above all, to offer a cost-effective and immediate solution for lift control systems.This versatile technology platform is suitable for all roomless and standard system configurations, with or without reduction gears. It is easy and comprehensible for users at any level and is particularly convenient thanks to the use of a single product to control every type of system.
The high-performance 32-bit hardware platform provides high-speed calculations and incorporates the regulation algorithms for synchronous and asynchronous motors with closed loop control and a powerful sensorless algorithm.Designed and developed exclusively for the lift sector, the ADL200 incorporates the most innovative and complete lift inverter technology. It includes solutions compatible with every type of power supply and a wide range of power ratings, built to meet existing and future standards and regulations.
Functions:
• Speed control
EFC (Elevator Floor Control) function: direct arrival at the floor and automatic calculation of deceleration point.
• Position control
EPC (Elevator Positioning Control) function: position regulator for automatic management of direct arrival at the floor, automatic speed control and saving of floor distances (system autotuning).
• Lift sequence
Typical sequence of input/output signals, I/O management, braking, output contactor and door control.
• Easy to read parameters in customer units
Availability of different engineering units for the main parameters, rpm or m/s for speed, m/s², m/s³ for cabin acceleration.
• Lift mechanical parameters
Mechanical system parameters such as pulley diameter and speed ratio for converting system units and weights, system for calculating inertia and speed regulation for the desired response.
• Ramp generation
Independent configuration of acceleration and deceleration ramp parameters and of the 4 jerk values for maximum travelling comfort in the lift cabin. Two independent S-shaped ramps, selectable via digital input with 4 independent jerk settings. Dedicated deceleration ramp corresponding to the stop command.
• Multiple speeds
8 internally settable speed reference values. Possibility of overwriting at start-up with additional values to ensure
smooth starting.
• Pre-torque (load compensation)
Initialisation of the speed regulator by the load cell sensor for smooth starting.
• Overload
Overload capacity optimised for typical lift application load cycles.
• Automatic fan control
The cooling fan control logic activates the internal fans according to the temperature.
• Emergency single-phase return to the floor power supply capability
In emergency conditions a 230 V single-phase supply voltage can be used to return the car to the floor (by UPS power supply or batteries with EMS module)
• Commissioning Wizard functionality
Wizard menu for immediate system start-up
Options:
KB_ADL multilingual programming keypad with memory
SD card for storing machine data
EMS (emergency supply module)
Dedicated EMC filters (in compliance with CEE-EN 61800-3)
External braking resistors
AC and DC input chokes
Vector inverter for motors Brushless with built-in power recovery AVRy
( )
- The AVRy series inverter offers the latest technology to meet the high demands of today’s civil lift engineering sector.
It’s the single solution that provides cutting edge control for both asynchronous and synchronous motors used in the lift industry.
AVRy’s advanced features, including its “clean energy” recovery technology (harmonic distortion of input current < 4%), and high performance in terms of the dynamics and comfort of installation, guarantee considerable savings in operating energy costs.Dedicated features:
• Lift sequence
• Parameters in linear unit
• Lift mechanical parameters
• Ramp generation
• Landing control
• User-friendly menu
VTdrive
Vector inverter for lifts with asynchronous motors ADL100
( )
- Derived from the ADL200, the ADL100 series is the "Entry level" range for simple, low-speed systems:
• For asynchronous motors only
• control: Advanced V/f SSC (Sensorless Scalar Control) – SLS – FOC (*)
• (*) digital encoder card in ADL120 versions only
• Simplified I/O configuration
• optional external EMC filter
• SD card and fieldbus not available
• terminal strips are not extractable.Functions:
• Speed control
EFC (Elevator Floor Control) function: direct arrival at the floor and automatic calculation of deceleration point.
• Lift sequence
Typical sequence of input/output signals, I/O management, braking, output contactor and door control.
• Easy to read parameters in customer units
Availability of different engineering units for the main parameters, rpm or m/s for speed, m/s², m/s³ for cabin acceleration.
• Lift mechanical parameters
Mechanical system parameters setting such as pulley diameter and speed ratio for converting system units and weights, system for calculating inertia and speed regulation for the desired response.
• Ramp generation
Independent configuration of acceleration and deceleration ramp parameters and of the 4 jerk values for maximum travelling comfort in the lift cabin. Two independent S-shaped ramps, selectable via digital input with 4 independent jerk settings. Dedicated deceleration ramp corresponding to the stop command.
• Multiple speeds
8 internally settable speed reference values. Possibility of overwriting at start-up with additional values to ensure
smooth starting.
• Pre-torque (load compensation)
Initialisation of the speed regulator by the load cell sensor for smooth starting.
• Overload
Overload capacity optimised for typical lift application load cycles.
• Automatic fan control
The cooling fan control logic activates the internal fans according to the temperature of the drive heat sink.
• Emergency return to the floor power supply capability
In emergency conditions a 230 V single-phase supply voltage can be used to return the car to the floor (by UPS power supply or batteries with EMS module)
• Commissioning Wizard functionality
Wizard menu for immediate system start-up
Options:
KB_ADL multilingual programming keypad with memory
EMS (emergency supply module)
Dedicated external EMC filters (in compliance with CEE-EN 61800-3)
External braking resistors
AC and DC input chokes
Space-Vector Inverter AGL50
( )
- AGL50 is a set of drives dedicated to controlling 4 to 7.5 kW asynchronous motors for lifts.
In view of its specific software, this series is particularly suitable for system modernisation and, generally, for all up to 1m/s open-loop applications.
Simple, flexible programming, which can be managed using an alphanumeric keypad or PC configurator, permits fast start-up of the drive.
Functions:
• 16 multispeeds
• 4 multiramps (linear, S-shaped with independent jerk settings)
• Self-tuning of motor parameters
• Integrated lift sequences
• Speed expressed in m/s
• Management of space calculated by the drive, even offline
• Short floor Control
• Motor contactor control
• Integrated brake control
• Speed regulator adaptive gain technologyOptions:
Dedicated EMC filters (in compliance with EN12015)
Input and Output chokes
Braking resistorsVTdrive
没有评论:
发表评论